Spiral Jet Crusher Of Barite

Spiral Jet Crusher Of Barite as the name referway is a mechanical equipment used in the production area, which is mostly used in pulverizing granules, fast pulverity, good accuracy.

In terms of airflow mill, first Understanding is its operating rules, which is very important because only familiarize yourself with the operation procedure to operate correctly.
1. The operation rules of Spiral Jet Crusher Of Barite are as follows: After the preparation before the boot receives the production order, prepare materials. Complete the site to clean the grocery. Check whether the transportation pipes and auxiliary equipment, whether the pipelines are blocked, leak or poor sealing, whether the auxiliary equipment is intact, whether it works normally. Whether there is a phenomenon that the material is accumulated in the outer casing and the separator, if the accumulated material is required. Whether the bearing is lubricated, whether it is lubricated in an appropriate place. Check if all pipes, fastening bolts, washers, spindles, and instruments are intact, normal and flexible.
Second, Spiral Jet Crusher Of Barite starts the motor, control the current and time at starting, so that the device can start. When the equipment is operating normally, the feed speed can be adjusted according to the properties of the material. Uniform continuous feed should not be large or small, thereby affecting the separation effect of the grinding machine, making the machine easily malfunction. During operation, if an abnormality occurs, stop checking immediately before the failure continues.
Third, the main procedures for the close and inspection of Spiral Jet Crusher Of Barite are as follows: After the material in the grinding machine housing is completely pulverized, it should stop the feed and turn off the motor. After the machine is idling for 3 minutes, press the stop button to stop the machine. When the machine is completely stopped, open the check door and check the wear of the vessel. Fill in the corresponding production record, update the device status flag, which is convenient for the next use.


What kind of performance characteristics have SPIRAL JET CRUSHER OF BARITE?
This classification device adds vertical grading devices, product production in design and research and development. The particle size can achieve fine-tuning between 97-150 mm, and can produce a good granular shape, a narrow distribution, and a plurality of particle segments. There is also a classifying machine in disassembly cleaning, more and more rapidly, and the inner wall is smooth without dead angles. The whole system is closed, less dust, low noise, and the production process is clean and environmentally friendly.
Spiral Jet Crusher Of Barite Causes and Solutions can be carried out from the following aspects:

1, the hammer installation error in the maintenance assembly. When the hammer is turned off, it is used to prevent the weight of the rotor from losing balance, and all the hammers in the mill.The film must be turned out together, otherwise a strong vibration occurs during operation.

2, the difference between the weight of the two sets of hammer exceeds 5 grams. The method of excluding is to adjust the weight of the hammer, so that the difference between the two sets of weight is less than 5 grams.
3, individual hammer card is too tight, there is no open in operation. After the stop, turn the observation with hand and find a way to turn the hammer flexible.

4, other parts of the rotor are unbalanced, and the adjustment balance needs to be carefully checked.

5, the spindle bending deformation. The solution is to school straight or replacement.
6, the bearing gap exceeds damage. It is generally used to solve the problem.
7. The bottom angle fixing nut is not fixed in a fixed or running. The solution is tightening.


ALPA Battery SPIRAL JET CRUSHER OF BARITE Case Sharing:
A energy company is a battery positive material production enterprise, with multiple production bases. The company's business scope includes new materials and main products research and development, battery materials and their accessories research, etc. The top of the list.
Case parameters:
Product particle size: D50: 15μm

Hour Yield: 300kg

Shan dong alpa is a variety of gas flow crushers, airflow mill, disk airflow mill, round Science and Technology Private Enterprise, Development, Manufacturing, and Applied Technology.