Steam Jet Mill for Guar GUM

Currently, STEAM JET MILL for Guar Gum has gradually entered people's lives, more and more plants, and companies are using the equipment.

Steam Jet Mill for Guar GUM is simple, but the function is very powerful, using Steam Jet Mill for Guar GUM usually gets a very good effect. Its design is simple, easy to operate, easy to clean.

What is the grading principle and process of Steam Jet Mill for Guar GUM? Below, below share.

1. Open the switch in the control cabinet, start the power supply, equipment operation;
2, the raw material enters the feeder
3, the raw material enters the feeder injector in the feeder
4, the raw material reaches the hierarchical body after special dispersion, grading through physical effects such as airflow and gravity;
5, the airflow of the three flow paths has the control valve group adjustment to maintain their respective balance;
6, grading The rear coarse fine product is recovered separately;
7, clean air is discharged into the atmosphere.

Let's learn together with Xiaobian to learn the Steam Jet Mill for Guar GUM inspection steps.

Steam Jet Mill for Guar GUM is an apparatus for achieving a dry material ultrafine pulverized apparatus using air separation, heavy polishing, shear. It consists of a cylindrical crushed chamber, a polishing wheel, a polishing rail, a fan, a material collection system, and the like. The material enters the cylindrical pulverizing chamber through the feed port, and is crushed along the grinding rail, and the crush is achieved. The pulverized material passes out the pulverizer through the negative pressure air flow caused by the fan, and the material collection system is entered, filtered through the filter bag, the air is discharged, the material, the dust is collected, and the pulverization is completed.

A disc airflow pulverizer first carefully checks whether there is damage in the transportation in the transportation, then put the high machine and the auxiliary electrical control unit in place, and then turn on the pipeline of the main aircraft, each When equipped with a tube, the \"iron anchor 609\" is used to protect the \"iron anchor 609\" to ensure the sealing of the pipe, and each single machine and pipe are connected to the ground wire and grounded to avoid dust explosion caused by electrostatic sparks. Before each stand-alone trial operation, check whether there is a metal item in the machine, if there is an exclusion. Whether the bolt is firm and the tightness of the belt, the reliability of the shield, and the like. After five minutes of empty bus, the operator should carefully observe the various instruments on the control cabinet, and they can be pushed. After the feed, the current is not allowed to exceed the rated value of 32.6A, otherwise it should be subtracted to ensure that the normal operation of the discharge is fixed. The stepless shift handle of the classifier can change the speed of the hierarchy wheel, at the same timeAdjust the excellent product.If the product particle size is required, the speed can be improved, and the rotational speed is reduced, and large particle size particles can be reduced.

The user receives the normal acceptance operation process after receiving Steam Jet Mill for Guar gum products. You can try to identify the use.Our company successfully exported a Steam Jet Mill for Guar GUM in the Philippines.
Technical parameters
Finished Products: D50: 3μm

Production capacity: 2-20kg / h

To learn more about Steam Jet Mill for Guar Gum,Please pay attention to the Shan Dong AlPA website, the company is in the development and production of crusher and other products, quality, and is trustworthy by consumers.