Fluidized Bed Jet Mill of Graphite Fluoride

FLUIDIZED BED JET MILL of Graphite Fluoride Technology is one of the important basic technologies in the modern industry. In the modern industry, the raw materials that require a powder state have a small and uniform particle size and higher purity, and pass through ultrafine The raw material has a change in nature, making ordinary materials have a broader application range,

Fluidized Bed Jet Mill of Graphite Fluoride advantages, a small amount of wear-resistant components made of special hard wear raw materials, volume Small, light weight, convenient accessories replacement. Fluidized Bed Jet Mill of Graphite Fluoride The compressed air is filtered, and the material is repeatedly collided with a multi-shaped high-pressure airflow intersection. The damaged material moves with the rising airflow to the cascading area under the exhaust. The low temperature failure is composed of silo, mechanical failure, air blower, cyclone, vibrating screen, liquid nitrogen tank, etc. After the damage material is cooled and embritful, it is easy to destroy at low temperatures, and the destruction effect is achieved by repeated impact, collision, shear, and conflict between materials and materials. The Fluidized Bed Jet Mill of Graphite Fluoride processes the speed of 20m / s high-speed blow, which affects other high-speed sports. Due to the large gas flow, the material impact strength is high, the grinding efficiency is high, the motion of the spray gun and the large axial movement of the cyclone data are minimized, and the impulse and metal wall wear are reduced. Since the air under the crushing chamber grinds the bottom of the conical bottom, the bottom portion enters the nozzle in the crushing chamber. The cone data can also be used for high-speed airflow nozzles, eliminating damage, blind spots, and data under spherical media and crushing rooms in time. The rolling of the cylindrical sphere, the irregular effects of the media, and the stratigraphic data, and the need for double-effect grinding, so that the grinding product is very thin and the particle size is uniform.

Fluidized Bed Jet Mill of Graphite Fluoride can be used in series with a multi-stage classifier and produced a product with multiple particle sizes. The device is easy to disassemble, the inner wall is smooth, and there is no dead angle. The whole system is closed, the dust is small, low noise, and the production process is clean and environmentally friendly. The control system uses program control and easy to operate.

The factors affecting the running efficiency of Fluoride devices are as follows:

1. Material performance, in general, air pulverization equipment can accommodate all brittle materials, but due to materials The performance is different, and the comminuted performance is also different. Due to the strength, density, hardness, viscosity, shape and electrical performance of different materials, the strength of the crushing effect is an important factor.The water content of certain materials will change the performance, toughness, and viscosity of the crushing material, and the fineness of the pulverized material will also generate noise.
2. If the processing capacity of the device is the same, if the processing material is different, the grinding fineness will be different. In general, the processing capacity of the airflow grinding machine is proportional to the particle size of the product.
3. The influence of back pressure refers to the average pressure of the pulverized indoor gas, and the increase in back pressure is not conducive to the crushing process, affecting the efficiency of gas flow grinding equipment.

ALPA pea protein Fluidized Bed Jet Mill of Graphite Fluoride case share: This customer is a food company in Russia. After looking for many powder equipment companies, they did not find the right equipment. It has been influenced by the company's production and operation, and finally I saw the ultra-smash of the pea protein before our website. Finally, through the incoming experiment, finally determine the Fluidized Bed Jet Mill of Graph of Graphite Fluoride purchased our company.

Technical parameters:

finished particle size: 400 mesh
Production capacity: 1.5T


For more consultation, please continue to pay attention to us, or inquire.