DISC JET MILL OF Stainless Steel

DISC JET MILL OF Stainless Steel is well balanced, only need to be produced in a smooth floor, and low noise, it can avoid dust leakage during the pulverization process, which is favored by the powder industry.

DISC JET MILL OF Stainless Steel is smashed in full-closed state, and the fineness of the pulverized particles is better, the granular shape is good, the yield is also large, and the pulverization process is no dust production. After the crushing, the material is purified, which greatly saves. Raw materials. DISC JET MILL OF Stainless Steel can achieve the effect of cell breakage during the pulverization process, which greatly increases the effective component of the medicinal material, and the efficacy is also easier to be absorbed by the human body. Experts pointed out that after pulverizing the gas flow crusher, the minimal component can reach the original efficacy. During the pulverization process, it can work according to different medicinal materials and crushedness, generally use a gas flow pulverizer to pulverize the drug. It is possible to save resources between 30% and 70%.

What kind of performance characteristics do you have in DISC JET MILL OF Stainless Steel?

This classification device adds a vertical grading device in the design and research and development, and the particle size of the product can be achieved 97- Try between 150 mm, and can produce a good granular shape, a narrow distribution, and a product form of multiple particle segments. There is also a classifying machine in disassembly cleaning, more and more rapidly, and the inner wall is smooth without dead angles. The whole system is closed, less dust, low noise, and the production process is clean and environmentally friendly.

How to continuity DISC JET MILL OF Stainless Steel life? Here are the following aspects:
1, during the production process, the temperature rise of the bearing must be regularly checked. When the temperature rises to 50 ° C, inspection should be checked, find a reason, troubleshooting.

2, when the new machine runs, the transmission belt is easily stretched, and the tightness of the belt should be adjusted to ensure the life of the belt.

3, regular inspections for the lids, promptly guarantee the quality of production and production.
4, the blades and bushing should always check the wear situation. When wear, the productivity is lowered, and the grain is thick.
5, host and gradient flow bearing oil grease lubrication, dedicated grease, and degree 265-295.
6, the cycle of the bearing is 2000 hours. The amount of the grease is filled into a 1/2 (upper test) or 3/4 (below the test), so we can't add too much grease. Otherwise, the bearing temperature is too high.
7. The spiral feeder is 4,000 hours, plus ordinary calcium based grease.

AlPa pea protein Disc Jet Mill of StaInless Steel case share: This customer is a food company in Russia. After looking for a lot of powder equipment companies, it did not find a suitable device.It has been affected the company's production and operation, and finally I saw the ultrafine pulverization of pea protein before our website. Finally, through the incoming experiment, I finally determined the purchase of our company's Disc Jet Mill of Stainless Steel.
Technical parameters:

Finished granularity: 400 mesh

Production capacity: 1.5T


Shan dong alpa specializes in the production and development and services of DISC JET MILL OF Stainless Steel product technologyWelcome to consult.With perfect quality, excellent service, the most affordable price, customers provide the best products and services for customers.