Air Classifier Mill for Tea Stem

Air Classifier Mill for Tea Stem is a crushing equipment commonly used in industrial production. Due to its excellent performance, it is widely used in the crushing operations of various materials. Although the efficiency of this work is very prominent, we still have to look at the machine, just like a normal machine, check the machine, eliminate the machine failure, make the machine more efficient and safely.

Air Classifier Mill for Tea STEM is a classified device with a wide range of applications in the current phase, which has a very good fineness in production, which can be finely pulverized silicon carbide. Metal, ore and other substances can also perform purity of ceramics, medicine, and biochemical products with high purity requirements.

Ultrafine Air Classifier Mill for Tea Stem Working Principle: Ultrafine Crusher Tested by the feed port spiral feeder, the material is fed into the crushing chamber between the body and the guide circle, rotating at high speed in the comminution. Under the blade impact, the material is attached to the gel fixed to the body, resulting in impact, shearing, and material, the material and the blade, the mutual collision, friction, and shear inter alternate. After the powder, under the tension of the negative pressure airflow, the small powder grains overcome self-weight, the over the guide circle with the gas flow, and enter the grading chamber. The fractionation impeller consists of the blade, and the high-speed rotating blade produces a centrifugal force opposite to the negative pressure, and the powder particles in the leaf can be subjected to a negative pressure gas stream and the granularity of the granules, the centrifugal force generated by the impeller, and the particles are larger than the critical diameter ( The granular particles of the grading particles are large, and the pulverized chamber continues to be pulverized, and the particles smaller than the critical diameter are discharged through the drain tube into the whirlwind collector. The higher the rotation speed of the hierarchical impeller, the finer the graded particles, and the rotation of the orthogonal impeller is the determinant of the size of the particle size.

AIR Classifier Mill for Tea Stem vibration and solutions can be carried out from the following aspects:
1. Insulating the hammer installation error in the assembly. When the hammer is turned off, in order to prevent the weight of the rotor from losing balance, all the hammers in the pulverizer must be turned out together, otherwise it will have a strong vibration in the operation.
2, the difference between the weight of the two sets of hammer exceeds 5 grams. The method of excluding is to adjust the weight of the hammer, so that the difference between the two sets of weight is less than 5 grams.
3, individual hammer card is too tight, there is no open in operation. After the stop, turn the observation with hand and find a way to turn the hammer flexible.
4, other parts of the rotor are unbalanced, and the adjustment balance needs to be carefully checked.
5, the spindle bending deformation. The solution is to school straight or replacement.
6, the bearing gap exceeds damage. It is generally used to solve the problem.
7, the bottom angle fixing nut is not fixedOr run loose in operation. The solution is tightening.

Alpa Quartz Powder Air Classifier Mill for Tea Stem Case Sharing:
A new material company is a high-tech enterprise engaged in electronic grade silicon fine powder production and development. The company has a number of silicon micron powder production lines, annual production of crystalline silicon fine powder, molten silicon fine powder, surface treatment silicon fine powder and other specifications. The company has always adhered to customer-centric, luxuriant needs to respond quickly and continuous innovation, and is committed to becoming a supplier of leading powder materials applications in the industry.
We continue to innovate around our customers, and work with partners. We are committed to providing competitive solutions and services for electronic materials, electrical insulation materials, special ceramics, precision castings, paint coatings, and other functional applications to create value for customers.
Case parameters:
Product particle size: D97: 5-75UM
Hours Yield: 20-100kg

Today, the knowledge of Air Classifier Mill for Tea STEM, I will introduce you to here, think For more information, please continue to pay attention to our website.