Fluidized Bed Jet Mill of Antioxidants

FLUIDIZED BED JET MILL of Antioxidants As a clean, efficient, high-level, high-yield of advanced crusher models in crushing, the use of a few corks from dozens of micro-test test With a few hundred tons of large production, Fluidized Bed Jet Mill of Antioxidants is narrow, the particle size distribution is narrow, the average particle size is fine; the powder is good, the product is purified; suitable for low melting point, thermal drugs; good sealable, less contamination, less pollution Easy to operate; crushing - mixed - dry online operations have been widely recognized by the company.

Airflow pulverized products except for particle size, there is also a narrow particle size distribution, smooth particle surface, particle shape, high purity, high activity, good dispersibility, etc. Since Fluidized Bed Jet Mill of Antioxidants generates a Juromon cooling effect during the crushing process, it is also suitable for low melting point and ultrafine pulverization of thermal materials. The gas ratio in the pulverization process is an important technical parameter and important indicator. If the gas is too small, the kinetic energy of the airflow will be insufficient, which will affect the fineness of the product. However, if the gas ratio is too high, not only waste energy, but even the dispersion performance of certain particulate materials will also be deteriorated. When the particle size of the feed is pulverized, the particle size of the feed is more stringent. In the case of titanium powder, when pulverizing the calcined material, it is necessary to control 100-200 mesh; the material after the pulverization surface is generally 40-70 mesh, and cannot exceed 2-5 mesh.

Fluidized BED JET MILL OF ANTIOXIDANTS Main Performance Features:

1, using vertical hierarchical devices, product particle size is adjustable between D97: 8-150 microns, good particle shape, narrow particle size distribution . It can be used in series with multi-stage classifiers and produces a product having multiple particles.
2, the device is easy to disassemble, the inner wall is smooth, no dead angle. The entire system is closed, the dust is small, low noise, and the production process is clean and environmentally friendly.
3, the control system is controlled by program control and easy to operate.

Fluidized Bed Jet Mill of Antioxidants is important, you need to pay attention to the following points:

1, check all the lines, electrical components, etc. of the pulverizer, whether it can work properly. Whether the machine is grounded, so that the housing is powered by electric shock. Whether the machine spindle has a card death, if it should be handled in time. Whether the machine has an abnormal situation during operation, if there is a stop check.

2, check the blade, is tightened, whether the blade gap can reach the specified standard. ShredderBefore using it, check the working room is enough to have a debris or slidably, if it should be removed in time.
3, after the offset is running, it can begin to start the feed. The pulverizer should stop the feed before stopping. Wait until the machine is completely discharged, it can be stopped.
4, the feed should be uniform, not over, so as not to increase the burden on the machine. The pulverizer cannot be cleaned, maintenance, etc. during operation.

ALPA Pigments Fluidized Bed Jet Mill of Antioxidants Case Sharing: The customer needs to use the pigment ultrafine pulverized equipment during its production. Through the ultrafine pulverization of the pigment to improve the quality of the product, after many other than the same type of equipment, finally chose our AlPa's Fluidized Bed Jet Mill of Antioxidants. Compared with the same type of equipment, our company's product reliability is higher, the pulverized particle size is more uniform, and the particle size after pulverization is narrow, and there will be no too much particle size range.
Technical parameters:

Finished granularity: D90: 13μm;

Production capacity: 130kg / h


Shan dong alpa is committed to Fluidized Bed Jet Mill of Antioxidants, mature Process, there is a high-energy technology R \u0026 D team, specializing in crusher research and development, survive by quality, welcome everyone to come to consult.