DISC JET MILL of Silicon Carbon Anode

The people currently used in daily life are also more, the airflow pulverizer is smashed into the standard size, which is generally smashed into micrometers, usually our equipment is more The device is constructed, usually composed of a portion of a coarse, fine powder or a wind device, or the like. The main purpose is to use wind energy to be powdered, and have canceled the traditional screening at the time of use. The main application is more useful in many industries such as mining or building materials. Some industries such as metallurgical or building materials, chemicals, etc. are useful to use large crushers for work.

DISC JET MILL OF SILICON CARBON ANODE technology is designed and manufactured in the core work.

There are usually two classification wheels: metal and ceramics, for some magnetic pollution-sensitive materials, the ceramic grading wheel must be used, and the current market is commonly used in the market. Another silicon nitride ceramic has excellent machining properties, high temperature resistance, corrosion resistance, wear resistance, high strength, high adhesion, low density, low friction coefficient and self-lubricity.

The grading wheel can be widely used in powder refining and grading industries. At present, the maximum diameter of φ180 mm is currently reached, the highest operating speed is 12,000 rpm, and the normal service life is more than 1 year. It has been successfully applied to Downstream users, the application is good. The maximum use of this classification wheel is to prevent metal pollution, in addition, its specific graviz is 40% lower than zirconia ceramics, which can not only greatly reduce the energy consumption of the motor, but can greatly lower motor energy consumption. Under existing motors, overcons can be achieved to obtain finer particles.

DISC JET MILL OF Silicon Carbon Anode works by a complete crushing system composed of crusher and cyclone separator, dust collector and air blower. After the compressed air is filtered, the high-speed nozzle is sprayed into the crushing chamber, and the material is pulverized by repeated collision, friction and shearing at the intersection of the multi-high pressure airflow. The crushing material moves together with the rising airflow to the classified area with the suction of the fan. Under the action of centrifugation, the thickness of the material is separated, and the graded cyclone is required to grade the cyclone to enter the cyclone dust collector, and the coarse comminution continues to be pulverized down. Suitable for dry crushing of various materials that are less than 9 in the Moh, especially for high hardness, high purity, high value-added crushing materials. It includes a vertical hierarchy device. The size of the product can be adjusted between D97: 8 and 150 microns, with a good particle shape and a narrow particle size distribution. Low temperature without media crushing. It is especially suitable for thermal sensitivity, low melting point, sugar-containing and volatile substances. The grinding process is mainly dependent on the collision of the material itself, and is different from the impact of the mechanical crushing blade or the hammer on the ground on the ground, so the equipment is high, and the product is purity.

Motor conservation measures for disc Jet Mill of Silicon Carbon Anode

1. Check whether the lubrication of the bearing is good
2, check if all fasteners of the pulverizer are tight.
3, check whether the transmission belt is installed correctly and the situation is good. If the belt breakage should be replaced in time, when there is oil in the belt or the groove, apply a clean rag to clean.
4. Check if the protective device of the crusher is good. If the protective device is found to be abnormal, it should be excluded in time.
5. Check that there is an absence of material or other debris in the damage chamber. If it is sometimes handled in time.
6, check whether the hydraulic starting machine head or the starting rod is returned, and the gasket is adjusted to be properly and compressed.

ALPA composites, molten silicon micro powder DISC JET MILL of Silicon Carbon anode case share:

Silicon fine powder is an earlier manufacturer of silicon fine powder, the company has strong technical strength , Advanced test instruments, perfect pre-sales, sales and after-sales service, can provide high-quality crystalline silicon powder, high-purely molten fine powder, high-white ultra-fine silicon powder, etc. The company is committed to providing advantageous solutions and services for other functional applications such as electronic materials, special ceramics.
The company continues to innovate around customers, and has always adhered to customer-centric, quickly responding to customer needs, and tailor-made quality products for customers, and continues to create long-lasting value for customers to achieve customers
case parameters:
Product particle size: D100: 15UM
Hour Yield: 300kg

Welcome everyone to continue to pay attention to our website to learn more!