Spiral Jet Mill for Dry TEA

In this economically booming area, many people know that Spiral Jet Mill For Dry TEA, crusher technology is in a leading position in the same industry.

Spiral Jet Mill for Dry TEA work is also a factor affecting work efficiency. When the temperature of the working fluid is too high, the flow rate of the gas will increase. Take air as an example, the critical speed at room temperature is 320 m / sec, when the temperature rises to 480 ° C, the critical speed can be increased to 500 m / sec, that is, the kinetic energy increases by 150%. Therefore, increasing the temperature of the working fluid is conducive to improving pulverization. The pressure of the working fluid is the main parameters of the jet speed, but also the main parameters affecting the fineness of the break. Typically, the higher the pressure of the working fluid, the faster the speed, the greater the kinetic energy. When the titanium powder is pulverized by superheated steam, the vapor pressure is usually from 0.8 to 1.7 MPa, and generally pulverized calcined material is high, and the material after the pulverized surface is low.

The main performance characteristics of the airflow pulverizer: 1, it contains vertical classification equipment, product size D97: 8 150 microns adjustable, granular shape, and narrow particle size distribution. It can be used in series with multi-stage classifiers, or producing multiple granular products at a time. 2, the device is disassembled and cleaned, the inner wall is smooth, no dead angle. The entire system is closed, less dust, low noise, clean and hygiene production process. 3. The control system uses program control and easy to operate.

Any mechanical equipment has certain precautions before use, and must check the precautions for operation, so that the damage rate is lowered, so the Spiral Jet Mill for Dry TEA is in use. What preventive measures?
1. Check whether the firmware is tight before use, whether the spindle direction is correct, so as not to damage the machine.
2, lubrication should be carried out in accordance with the requirements to make the machine operating properly.
3, the material cannot be mixed before the grinding machine is added to avoid damaging the pulverizer.
4, foreign matter should not be treated in time to avoid damage to the tool.
5. When using the crusher, if there is abnormality, it should be handled immediately to avoid a large loss. 6. If damage should be replaced immediately, certain components should be checked.

ALPA Avollast Glucose Medium Spiral Jet Mill for Dry TEA Case Sharing: A starch sugar is needed to take a dispelling of water glucose media, and some of the powder enterprises have not found appropriate. device of. We have found appropriate equipment in our AlPA. Our Spiral Jet Mill for Dry TEA can disperse the water glucose medium.
Technical parameters:
finished particle size: waterless glucose is greater than 18 mesh

If there is stillDoubt, you can contact Alpa Technology Co., Ltd. directly, warmly welcome users to come to consult and purchase, our company equipment is manufactured, the size is complete, there is a suitable for you!