Spiral Jet Mill for Quartz Sand

Spiral Jet Mill for Quartz Sand Technology is one of the important basic technologies in the modern industry. In the modern industry, the raw materials that require a powder state have a small and uniform particle size and a higher purity, and ultrafine The raw material has changed, making ordinary materials with a broader application range,

Spiral Jet Mill for Quartz Sand and cyclone separators, dust collectors and air machines have become a complete crushing system. After filtering the compressed air, the high-speed nozzle is sprayed into the pulverized chamber, and the material is repeated, friction and shear at the intersection of the multi-high pressure airflow. The crushing material moves from the rising airflow to the grading area under the suction of the fan, producing a strong centrifuge generated by a high speed rotation. Under the action of force, the fine particles are separated, and the cyclone and dust collectors are collected by the granular particles, and the coarse particles fall into the pulverized region to continue pulverization.

Spiral Jet Mill for Quartz SAND Working: Airflow Crusher and Cyclone Separator Air Machine Machine is a complete pulverized system, compressed air is filtered and dry, then pass the Lavar nozzle in multiple high pressure air The intersection enters the crushing room at high speed. The material is repeated collision, friction and shear, and the crushing material is pulverized in the fan torch. Under the action of the high-speed rotary classification machine, the fine particles that satisfy the particle size required by the grading wheel with thickness, fine product to collect the fine particles and dust collectors by the grading wheel with the thickness, fine particles of the particle size and the dust collector and dust collectors. And continue to break in the broken area.

High-pressure gas (compressed air, superheated steam or other gas) injected from the pulverization chamber and the high-speed air flow consisting of solid particles injected into the crushing chamber were subjected to tangential shock of the air flow injected from different angles. The solid particles collide with each other and friction in the mixed airflow. Since the temperature generated during the pulverization is small, it is conducive to the low melting point crushing material. When toxic, flammable or radioactive substances are crushed, superheated steam is usually used to prevent outwardly spread.
This is because all materials can be precipitated when steam is condensed. The gas flow pulverizer utilizes the material to achieve huge kinetic energy under the action of the high-speed airflow, causing the high-speed collision and the severe friction between the particles, while the high-speed airflow generates shear effects, thereby achieving the purpose of pulverization.


Ultraflight Jet Mill for Quartz SAND is an ultra-smuggled device that utilizes air separation, heavy polishing, and shear. It is widely used in various industry. Let's take a brief introduction to its daily maintenance content.

1, when the bearing oil is high, it is necessary to stop checking the cause of the fault and removal immediately.

2, RongEasy mill should pay attention to the extent of the wear, pay attention to and prepare for replacement of parts.
3, for the top surface of the chassis of the active device, it is necessary to remove dust and other debris avoiding the machine that cannot be broken, the active bearing cannot move on the chassis, causing an accident.
4, all loads of the machine are bearings, so good lubrication and bearings have a large relationship, it can directly affect the service life of the machine and the operating rate, so the amount of lubricating oil required to be injected should be reached. Good seal.
5, the sleeper installed is easy to loosen, and it must be checked frequently.
6. Note that the operation of each part of the machine is normal.
7. If the rotating gear is in operation, if there is a hitting sound, it should be stopped in time and remove the fault.


ALPA FENI50SPIRAL JET MILL for Quartz Sand Case Sharing:

A technology company is a metal material as the main business, serving emerging industries, in powder materials and products, magnetic materials and products, welding Materials and products, filter materials and other fields. We continue to innovate around our customers, and work with partners. We are committed to providing competitive solutions and services for advanced metal materials, product programs, and other functional applications to create value for customers. Products have been sold to several countries and regions, and are recognized by many well-known companies and customers at home and abroad.

Human Yield: 300kg

Shandong AlPa is a source manufacturer specializing in Spiral Jet Mill for Quartz Sand, all the year round to provide equipment for domestic and foreign customers, welcome to inquire!