Steam Jet Mill for Flake Graphite

With the development of the times, the progress of society, the development of the market is elegant, and more and more manufacturing have to accelerate innovation, some transformations, some continue to improve the technical level of the product, to adapt to the development of the market, Meet the customer's picky requirements. In the case of continuous changes in the market, only constantly innovation, constantly improve your technical level, constantly improve your own products, so that the STEAM JET MILL for Flake Graphite industry has a broader development space.

1. Simple structure, Disassembly and packing is simple, convenient, just one person can complete the operation, disassembly and cleaning.
2, elliptical pulverizing cavity design, less airflow resistance, so that the compressed air utilization reaches the highest and reduces loss.
3, Steam Jet Mill for Flake Graphite causes the finished product to purity, no impurities, and non-pollutant materials due to its pulverization principle.
4, the pulverization is good, the particle size distribution is uniform.

The above is an application for you to introduce Steam Jet Mill for Flake Graphite in the industry.


Steam Jet Mill for Flake Graphite Main Performance Features:

1, using vertical hierarchical devices, product particle size is adjustable between D97: 8-150 microns, particles Good shape, narrow particle size distribution. It can be used in series with multi-stage classifiers and produces a product having multiple particles.
2, the device is easy to disassemble, the inner wall is smooth, no dead angle. The entire system is closed, the dust is small, low noise, and the production process is clean and environmentally friendly.

Steam Jet Mill for Flake Graphite The reason and solution can be carried out from the following aspects:
1, the hammer installation error in the maintenance assembly. When the hammer is turned off, in order to prevent the weight of the rotor from losing balance, all the hammers in the pulverizer must be turned out together, otherwise it will have a strong vibration in the operation.
2, the difference between the weight of the two sets of hammer exceeds 5 grams. The method of excluding is to adjust the weight of the hammer, so that the difference between the two sets of weight is less than 5 grams.
3, individual hammer card is too tight, there is no open in operation. After the stop, turn the observation with hand and find a way to turn the hammer flexible.
4. Other rotorsThe weight of the parts is unbalanced, and the adjustment balance needs to be carefully checked.
5, the spindle bending deformation. The solution is to school straight or replacement.

7. The bottom angle fixing nut is not fixed in a fixed or running. The solution is tightening.


ALPA Composite Powder Steam Jet Mill for Flake Graphite Case Sharing: The customer is a renewable resource company that requires the selection of different granular sections of the composite powder, and it is necessary to select a super less than 30 μm. powder. Investigate a number of domestic grading equipment manufacturers, did not find the right equipment, and finally found the right equipment in our AlPa, and selected our vertical grading machine equipment. Product particle size: D97 ≤ 30μm hour yield: 80T
Welcome major composite powder manufacturers to visit, incompetent experiments.

Shan Dong Alpa is committed to Steam Jet Mill for Flake Graphite, has a mature process, strong technical strength, specializing in crusher research and development, survive by quality, welcome everyone to consult.