Jet Mill of Portland CEMENT

Jet Mill of Portland CETINT as a smashing main device, the role is also increasing, in the industrial sector of metallurgy, mine, chemical, cement, requires a large number of raw materials and reuse waste every year. Processing processing with a classifier. In the coking plant, sintering plants, ceramics factories, glass industries, powder metallurgy, etc., need to break the raw materials to the particle size required for the next job. In the chemical, power sector, the hierarchy, the raw material is broken, grind, increase the surface area of \u200b\u200bthe material, has created favorable conditions to shorten the chemical reaction of the material.

Under the action of the high-speed rotary impeller, the gas pressure flowing through the impeller increases, and the high pressure airflow flows out of the impeller, the fine particles are ejected. Since the blade of the rotary vane is designed as a bending, the inlet is large, the exit cross-sectional area is small, so the airflow pressure at the outlet is reduced, the speed increases, and the rotational flow is conducive to classification.
The grading point adjustment mechanism sets three adjustment rods and keeps its synchronous motion using the chain. When the adjustment rod moves up, the fine powder increases; when the adjustment rod moves down, the fine powder is reduced. The grading point can be continuously adjusted, and the granularity of the Jet Mill of Portland CEMENT can be adjusted. The granular weight of the grading weight can reach D97 ≤ 3 ≤ 150 microns, which is suitable for fine grading of dry micrometer products.
The setting of the control ring is to ensure that the control ring is formed between the control ring and the radial particles ring, and the stability of the airflow flow is controlled. The residual windlet inevitably introduces excess gas from the dry material, the temperature of the classification chamber is high, and the air can expand, and therefore designed a residual tightening to maintain the stability and balance of the graded indoor airflow.



JET MILL OF Portland CEMENT Work: Crusher and Cyclone Separator Air Machine Connect a complete crushing system, compressed air is filtered and dry, then pass the Lavar nozzle A plurality of high-pressure air interchange enters the crushing room at high speed. stream. The material is repeated collision, friction and shear, and the crushing material is pulverized in the fan torch. Under the action of the high-speed rotary classifier, the fine particles that satisfy the particle size required by the grading wheel are separated from the thickness and fine product to the t-cyclone and dust collector by the grading wheel with the thickness of the granularity. Particles and continue to break in the crush area. High-pressure gases (compressed air, superheated steam or other gases) injected from the broken chamber and the high-speed air flow consisting of solid particles injected into the crushing chamber are subjected to the tangential impact of the air flow injected from different angles, so that the solid particles are mixed in a mixed airflow. Mutual collision and friction and refine.

Before the device is turned on, the connection site, sealing and line, etc.

The amount of feed should be determined according to the size of the powder grading machine load, ensuring that the host is in the state of rated load. The particle fineness can be adjusted to adapt to the grading requirements.
Debutors such as the heat-sensitive material, then the power of the main motor is slightly lower than the rated power. The size of the air volume in the delivery line can be achieved by adjusting the damper of the fan.

ALPA Lithium Lithium Iron Sites Sharing: This customer is not more than domestic and foreign powder by comparing the performance of the phosphate of iron phosphate in our production. The same type of equipment in equipment companies is poor, even in some aspects there are unique advantages. After experimenting, the company purchased Jet Mill of Portland Cement.
Technical parameters:

Production capacity: 400kg

The equipment market is the moment of changing, the current airflow classifier has certain needs in the market. However, the society is constantly evolving, no matter what industry needs to keep up with the times, it can lead the industry.