Steam Jet Mill for Titanium Sponge

STEAM JET MILL for Titanium Sponge is one of the common ultra-fine shredded methods, widely used in non-metallic mine, drug, chemical, metallurgical and other industry materials ultrafine pulverized or fine pulverized, with product particle size, narrow particle size distribution The surface of the particles is smooth, the particle rules, high purity, and high activity.

Steam Jet Mill for Titanium Sponge is suitable for microfinishing machines of materials such as synthetic resins and chemical chemistry. It is different from the ordinary pulverizer. It is not only simply crushed such as impact force and cutting force, but also subject to a large amount of ultrasonic eddy current produced on the back of the blade and the vibration of high frequency pressure generated by the resulting material. Crushing can also be broken, viscous and elasticity under certain conditions. The raw material temperature of the machine increased, and the thermal material can be broken.

Steam Jet Mill for Titanium Sponge's crushing chamber is arranged in a particularly designed high-pressure air nozzle, which is purified and dried from the nozzle, forming an ultrasonic air flow. Materials collide in the center of the high-speed airflow intersection, and it is pulverized in an instant. The pulverized particles rose to the grading chamber, and the qualified particles enter the cyclone separator with the gas, and finally obtain the desired product, the exhaust gas enters the dust collector.

The turbine grading system set in the classification room can obtain a powder of micrometers or even finer. When the pulverized material is pulverized in the pulverized chamber, the same particles at the edge of the turbine will be attached to the two different effort of the centrifuge field (i.e., centrifugal force and airflow resistance generated by turbine). When the particles are large, the centrifugal force is greater than the resistance, and the large particles fly toward the chamber pool wall along the turbine tangential direction, and then returned to the pulverizing chamber to be re-pulverized. When the particles are small, at this time, at this time is less than the resistance, the small particles enter the interior of the turbine with the rising airflow, and collectively collected by the cyclone to qualified products.


Ultraflight STEAM JET MILL for Titanium Sponge operating procedure

1. You need to check if the lubrication is oil before booting.

2, clearing the metal, sand, stone and other debris in the material to prevent damage to the machine.
3, the hand must not reach into the feed port, and the cover must not be opened in the operation.
4, the screen aperture should be appropriately selected, and the damage is required.
5. It is strictly forbidden to start the load, the machine is running a minute and then feeds, and the appropriate amount of water is marked.
6, the air is idling in front of 2 minutes to turn off the machine.


ALPA Desulfurization STEAM JET MIET MILL for Titanium Sponge Case Sharing: The company is a high-tech company, need aThe desulfurizer pulverizer, investigated a number of powder equipment manufacturers at home and abroad, and finally chose our AlPa Steam Jet Mill for Titanium Sponge.

Technical parameters:

finished particle size: 200 mesh 90% pass
production capacity: 4-5T


Welcome everyone to inquire!