Air Classifier Mill for Spironolactone

Air Classifier Mill for Spironolactone technology is one of the important basic technologies in the modern industry. In modern industries, the raw materials that require a powder state have a small and uniform particle size and higher purity, and ultrafine raw materials. Its nature changes, which makes ordinary materials have a broader application range,

In terms of airflow milling operation, first, it is very important to understand that it is very important because only familiar operation procedures On to operate correctly.
1. The operation rules of Air Classifier Mill for Spironolactone are as follows: Prepare materials after the preparation before the boot is received. Complete the site to clean the grocery. Check whether the transportation pipes and auxiliary equipment, whether the pipelines are blocked, leak or poor sealing, whether the auxiliary equipment is intact, whether it works normally. Whether there is a phenomenon that the material is accumulated in the outer casing and the separator, if the accumulated material is required. Whether the bearing is lubricated, whether it is lubricated in an appropriate place. Check if all pipes, fastening bolts, washers, spindles, and instruments are intact, normal and flexible.
Second, the activation of the Air Classifier Mill for Spironolactone first starts the motor, controls the current and time at starting, so that the device can start running. When the equipment is operating normally, the feed speed can be adjusted according to the properties of the material. Uniform continuous feed should not be large or small, thereby affecting the separation effect of the grinding machine, making the machine easily malfunction. During operation, if an abnormality occurs, stop checking immediately before the failure continues.
Third, the main procedures of the off and inspections of Air Classifier Mill for Spironolactone are as follows: After the material in the grinding machine is completely pulverized, it should stop the feed and turn off the motor. After the machine is idling for 3 minutes, press the stop button to stop the machine. When the machine is completely stopped, open the check door and check the wear of the vessel. Fill in the corresponding production record, update the device status flag, which is convenient for the next use.


AIR Classifier Mill for Spironolactone Working Principle:
The qualified fine powder is delivered into the hierarchy of the upper portion of the pulverizer through the rising airflow. The classifier classifies the qualified materials and enters the cyclone collector (if a product having several particle size is required, add a plurality of vertical turbine classifiers). Fine tails are delivered into the bag dust collector via airflow. After filtration, the tail enters the exit of the lower part of the filter and empty the air.

Main components of this unit: classifier, grinding, grading, synchronous completion, tune through variable frequency speedThe speed of the segmentation machine can arbitrarily adjust the product fineness. For example, if a machining process requires a number of particle size sections of the product, then two to four can be increased on the basis of a standard classifier, so that the machine becomes the \"two five\" machines of pulverization and grading.

In order to let everyone have a further understanding of Air Classifier Mill for Spironolactone, the following simply analyze common problems and how to solve these problems.
1, ask: How to choose equipment in the face of materials that need to be smashed?
A: (1) Moh's hardness is less than 3. The mechanical grinding machine and hierarchical impact mill can meet the crushing requirements, saving a certain cost. (2) High hardness, high purity material is higher than 3.5 hardness. (3) If it is a metal powder, you can atomize the grading and cannot be broken.
2, ask: The custom pulverizer can be used in different materials. What is the difference between them?

A: (1) After the food and drug is crushing, it is necessary to meet the level of food safety, the best choice for stainless steel materials, because the mirror is polished inside and outside, does not produce iron pollution. (2) Broken material is easy to worn, and the purity is required to be high after crushing, and the stainless steel is optimal. (3) If the crushing requirements are not high, cost savings, the air pulverizer of carbon steel material can be used.
3, ask: When using a gas flow crusher, the fineness of the finished product does not reach the standard, how to adjust the classification wheel is not used?
A: (1) If the new custom pulverizer does not meet the requirements of the granularity, the device can be incorrect.
Therefore, in order to avoid such errors, it is best to perform material crushing and grading experiments before purchase, and carefully check whether the experimental results are satisfactory.
ALPA Steel slag Air Classifier Mill for Spironolactone case share: This customer is a steel slag re-use technology company, which is mainly engaged in steel slag sorting project. Through the experiment, our AlPA classifier reached customer needs.
Product particle size: D80: 23.4
Yield: 175kg / h 加 加 加

The Air Classifier Mill for Spironolactone produced by our company can not only separate from ordinary powder, not only 20-2μm in a normal powder Micro powder, and can be used directly with mechanical pulverization equipment, forming a closed circuit, improving pulverization efficiency, and avoiding high temperature in the cavity to cause adhesion, glue, glue, resulting in operation, and the grading machine has also been a major user Praise, friends with need are in contact us!