Spiral Jet Mill for Fly Ash Beads

The people currently used in daily life are also more, the airflow pulverizer is smashed into the standard size, which is generally smashed into micrometers, usually our equipment is more The device is constructed, usually composed of a portion of a coarse, fine powder or a wind device, or the like. The main purpose is to use wind energy to be powdered, and have canceled the traditional screening at the time of use. The main application is more useful in many industries such as mining or building materials. Some industries such as metallurgical or building materials, chemicals, etc. are useful to use large crushers for work.

Spiral Jet Mill for Fly Ash Beads is a high-performance grading effect that the ultrafine powder below the micrometer-level, particularly high-end powder materials, and can provide high performance grading effects that other forms of grading equipment. Three different particle size ranges of more than three or more different particle size ranges can be obtained by narrower particle size range, and there is a wide range of applications of powder raw materials; there is a wide range of applications in metal and non-metallic fields.

Spiral Jet Mill for Fly Ash Beads Principles: When the compressed gas passes the injection of the injector, the pulverized raw material enters the pulverizer, there are multiple pulverized nozzles in the pulverizing chamber, and the supersonic air flow is injected, so that the material is affected by the gas stream. High-speed shock and material collision, friction, and pulverized, the grading tube separates the thicker particles, the crude particles are circulated to the pulverizing chamber to continue pulverizing, after the interior closed circuit circulation is pulverized, and finally the distribution of uniform dispensing in the discharge port. . 1. Suitable for dry ultrafoil. Due to the large impact speed, it can reach 2.5 Mach or more. It is easy to obtain 1-10 micron particles, depending on the material properties, it is possible to obtain less than 1 micron particles. 2. Because there is a closed-circuit classification mechanism inside the pulverizer, the product is thick The particles are constantly pulverizing, and therefore the particles are uniform, small particle size distribution ranges are obtained. 3, the device has short-striped time, simple structure, convenient operation, small area, low noise (72 decibel) and no vibration. 4, the efficiency of the pulverization is high, which can be pulverized, and the purity of the pulverized article can be maintained.

Spiral Jet Mill for Fly Ash Beads is widely used, do you know how to use it correctly? The following content hopes to help you.

1. Preparation before departure. Check if the host, connector, pipeline, and the valve are normal, working properly.

2, open the machine

(1) Open the compressor power supply, the dust collector pressure valve and the main air valve, open the air pulverizer power switch, and turn on the power switch.

(2) From zero, gradually adjust to the specified speed.

(3) Open the fan, cyclone separator, dust collector, charge motor, open the total power box, set the inverter frequency, and then start charging.
(4) The particle size of the finished product can be adjusted according to the frequency and bearing capacity of the grading wheel.
3, the sequence of stops:

inverter-feeder-main air valve-compressor-grade impeller-motor cyclone material, dust removal switch-fan-main power supply-air compressor .
4, Maintenance

(1) The motor should be lubricated regularly, but the lubricating oil should not excessively avoid the bearing temperature.
(2) Check the wear of impeller, helical conveyors, and crushing nozzles.
(3) After pulverizing the material, the rubber powder should be removed to avoid clogging, thereby affecting the crushing effect.
(4) After the filter bag, it should be cleaned or replaced.
5. Precautions

(1) When the discharge equipment is run, the unloading port cannot be reached, and the accident occurs.
(2) The rotational speed of the impeller must not exceed the specified requirements, otherwise the temperature is too high, the impeller, and the electric chance are damaged.
(3) Regularly check the safety valve to ensure safety.

ALPA Light Burning Magnesium Spiral Jet Mill for Fly Ash Beads Case Sharing: This customer is a device company, focusing cement, mine, chemical, electric power, metallurgy, etc., mainly engaged in these industries Wear equipment, the customer needs to support its customers more suitable airflow classification equipment, after many exam, I chose our ALPA air classifier. Buy two devices. Product particle size: D80: 15μm hour yield: two 15t / h.
Our AlPA classifier can support ball mills, vertical grinding, Raymond mill, mechanical mill, etc., welcome customers to visit, incompetent experiments.

shan dong alpa one dedicated to Spiral Jet mill for Fly ash beads, has a mature process, strong technical force, specializing in Spiral Jet mill for Fly ash beads, the quality of survival, welcome everyone to come consult.