Jet Mill of Carbon Ball

With the rapid growth of China's economy, high-energy mining machinery industry, especially Jet Mill of Carbon Ball will have a huge development space, and various mineral powder products will develop rapidly. In order to ensure sustainable development of the entire mineral powder industry, green, environmentally friendly, healthy FLUIDIZED BED JET MILLs and products are more extensive. When applied to people's lives, it is necessary to optimize the use of equipment technology.

Jet Mill of Carbon Ball is applied to the ultrafine pulverization of the material. After the material is extracted, the properties of the powder will have a large change in the properties of the powder, and it appears high viscosity after being affected. Powder is extremely prone to aggregation in the feed opening, pulverizing cavity and exhaust pipe, requires special treatment processes and specific design. Shan dong alpa design-developed material smashed hit in the crushing of materials.

JET MILL of Carbon Ball Compressed Gases The high-speed jets generated by the feed nozzle The material particles in the bucket are introduced into the disc pulverity, and there are several jet nozzles around the pulverizing chamber. The high-speed fluid is injected in the direction, producing an ultra-high-speed swirling in the pulverizing chamber. The coarse particles in the opposite ultra-high-speed swirls in the superiospantial cyclone generate hit and friction in the intersection, and the particles were quickly pulverized. When the particles are pulverized to the fractional particle size below the fractional particle size, the centrifugal force of the particle movement is reduced, and the grading swirling is separated from the center outlet under action, and is collected from the center outlet. Such a pulverizer, the motion of the particles can be decomposed into two components in both directions. In one direction, the direction of movement of the particles is substantially consistent, and there is no significant impact pulverizing effect, and only in the other direction, the particles are opposite, and the particles produce effective impact. Therefore, this impact of the intersection is limited, and the energy of ultra-high-speed moving particles has not been fully utilized, so the production energy consumption is still high.
Jet Mill of Carbon Ball works is a complete crushing system composed of crushers and cyclone separators, dust collectors and air blowers. After the compressed air is filtered, the high-speed nozzle is sprayed into the crushing chamber, and the material is pulverized by repeated collision, friction and shearing at the intersection of the multi-high pressure airflow. The crushing material moves together with the rising airflow to the classified area with the suction of the fan. Under the action of centrifugation, the thickness of the material is separated, and the graded cyclone is required to grade the cyclone to enter the cyclone dust collector, and the coarse comminution continues to be pulverized down. Suitable for dry crushing of various materials that are less than 9 in the Moh, especially for high hardness, high purity, high value-added crushing materials. It includes a vertical hierarchy device. The size of the product can be adjusted between D97: 8 and 150 microns, with a good particle shape and a narrow particle size distribution. Low temperature without media crushing. Especially suitable for thermal sensitivity, low melting point, sugar and volatileQuality crush. The grinding process is mainly dependent on the collision of the material itself, and is different from the impact of the mechanical crushing blade or the hammer on the ground on the ground, so the equipment is high, and the product is purity.

Any machine device must pay attention to it before use, you must pay attention to use, operation, make it damaged by minimize, then what should you pay attention to before using Jet Mill of Carbon Ball?

1, before use, check if all fasteners are fastened and whether the direction of operation of the spindle is correct, so as not to damage the machine.

2, lubrication should be performed as required to ensure the normal operation of the machine.

3, before adding the material to the pulverizer, it is not mixed to avoid damage to the grinding machine.
4, whether foreign matter or impurities, if it should be disposed in time to avoid damage to the tool.
5. If there is any abnormality in use, it should be treated immediately to avoid more loss.
6, some parts should be checked regularly. If it is damaged, it should be replaced immediately.
ALPA Solid Mannitol Jet Mill of Carbon Ball Case Sharing: A food company requires large production of solid mannitol ultrafine powder. Many of the domestic powder companies have not found a crusher of the compound GMP standard food grade production. The general compound GMP standard pulverizer does not meet the large capacity required for the company. With our ALPA, the company purchased 1 Jet Mill of Carbon Ball of our company. The demand for the large production of solid mannitol is met, which is satisfied with the GMP standard.
Technical parameters:
finished particle size: mannitol: greater than 710 um accounts for 7.34%
Production capacity: Mannitol: 2T


Alpa Design Jet Mill of Carbon Ball equipment A very good reputation has been obtained in the actual production application, and it is also a good praise from the user. If you need to buy Jet Mill of Carbon Ball, please feel free to contact us.