Jet Mill of Waterborne Resin

Jet Mill of Waterborne Resin is an industrial equipment. With the development of society and the needs of people's lives, the industrial community is increasingly demanding various fine powder, and the requirements, purity and pass rate requirements are also It is increasingly high, and the application of classification machine is also more extensive.

Jet Mill of Waterborne RESIN is mainly after accelerating compressed air or inert gas, using high-speed elastic fluid (300 to 500 m / s) or overheating steam (300 to 400 ° C) to make particles Between, between the gas and the particles, the particles and other components produce strong impact, shear, collision, friction, etc., at the same time, under the action of the airflow rotation, or with the classified machine, Different particle grading achieves ultra-fine pulverization.

Jet Mill of Waterborne RESIN is a common preparation method of pharmaceutical powder, suitable for antibiotics, enzymes, low melting points, and other thermal drugs. With the continuous advancement of ultrafine pulverization technology, it will play an increasingly important role in the pharmaceutical industry.
Jet Mill of Waterborne Resin Working Principles:
The power of the machine uses purification and dry compressed air. The compressed air is sprayed into the crushing chamber at high speeds of special supersonic nozzles. The airflow has a high-speed movement of the material, resulting in a strong collision, friction and shear between materials and materials, thereby achieving breaking. Outlet, enter the collection system. The pulverized material rises into the classification chamber to meet the particle size required by the granularity, and the particles do not reach the particle size required to continue pulverization. The entire production process is fully closed, continuous operation, no dust pollution, purified by dust removal, filtration.

JET MILL OF Waterborne RESIN Cold When there is oil, it is necessary to clean up in time

Jet Mill of Waterborne RESIN has been exchanged into an industrial manufacturing field. As a common production equipment, it is not only necessary, and sometimes Jet Mill of Waterborne Resin is also damaged. Let's take a look at how to check the repair equipment.

Daily maintenance Jet Mill of Waterborne Resin To check the power outlet, plug, the power cord has no oxygen offset, the break, if you do not have a power test machine, when the motor is powered, it is light When the header is rotatable, it can be determined whether there is a capacity failure in the two start capacitances of the machine. If you can make a discharge spark at this time, there is a very frightening, indicating that the capacitor can be used; if sparks and soundThe sound is weak, indicating that the capacity of the capacitor has dropped, and the new or add a small capacitor. The airflow pulverizer does not use this method if the capacitor has damaged the short circuit, and it must be replaced with the same size new product.

In addition to this product of Jet Mill of Waterborne Resin, there is also a rod mill high speed pulverizer. This crusher is very good, it is very important, while daily maintenance is more important, the following is this Maintenance focus of air current pulverizer. Check if the lubrication of the bearing is good to check if all fasteners are tight. Check if the drive belt is installed correctly and the situation is good. Check if the protective device is good. If the protective device is found, it should be excluded in time. Check that there is no material or other debris in the damage chamber, if it is sometimes cleaned. Check if the hydraulic starting machine head or the starting roof rod is returned, the adjustment space is installed correctly and compact.

The above is the knowledge of the daily maintenance and maintenance of the product from Jet Mill of Waterborne Resin.

AlPa Quartz Powder Jet Mill of Waterborne Resin Case Sharing:
A silicon material company main business scope includes: quartz, 坩 waste processing, production; silicon fine powder, square stone, molten stone, quartz sand, kaolin , Flame retardant sales; self-operated and proxy products and technical import and export business
Case parameters:
Product particle size: D97: 5-75UM

Hour Yield: 20-100kg

As a 20-year powder engineering equipment manufacturer, Shandong, Shandong, has more than 3,000 customers at home and abroad, and has a rich research and development and production experience, which has always led the front end of the industry, so before consulting, you need to provide a characteristic information of crushing materials, and print and exit granularity. Parameters, production and production range, purity requirements, specific process requirements (anti-high temperature, explosion-proof, anti-dust pollution, etc.), professional engineers provide appropriate equipment models or system solutions. Welcome to inquire.