Steam Jet Mill for Plastic Powder

In many crushing methods, STEAM JET MILL for Plastic Powder has become one of the most mainstream pulverization techniques with a small particle size, narrow particle size distribution, high purity, high particulate activity, and good dispersibility. Especially suitable for crushing drugs such as contaminated materials.

1. Simple structure, Disassembly and packing is simple, convenient, just one person can complete the operation, disassembly and cleaning.
2, elliptical pulverizing cavity design, less airflow resistance, so that the compressed air utilization reaches the highest and reduces loss.
3, Steam Jet Mill for Plastic Powder causes the finished product to purity, no impurities, and non-pollutant materials due to its pulverization principle.
4, the pulverization is good, the particle size distribution is uniform.

The above is an application for you about Steam Jet Mill for Plastic Powder in the industry.


The working principle of Steam Jet Mill for Plastic Powder is composed of a hierarchy, a cyclone separator, a dust collector, and a guide. Under the pulverizing fan puller, the lower end of the gas pulverizer is moved upward to the hierarchical region, and the thickness and fine product are separated from the strong center of effort to the high-speed rotation grade turbine. The cyclonic separator or dust collector is collected by the grading wheel, and fine particles required to meet the particle size are collected, and the coarse particles are collected. The velocity of the entrained fine particles disappears and falls along the two towers of the cylinder wall. The crude particles and fine particles are separated by strong purification of the two winds, and the fine particles rises twice as the grade region, and the crude particles drops to the discharge port.
Steam Jet Mill for Plastic Powder is a more accurate mechanical, in the daily use and maintenance process, some details still need operators' attention. In order to improve the pulverization efficiency of gas flow mill, it is necessary to check whether the feedstock meets the requirements before the production, and the foreign matter is strictly prohibited into the raw material.
In production, a certain number of materials must be maintained in the airflow grinding chamber. In the case where the flow rate of the pulverized gas is not changed, the material in the grinding cavity is large, the gradient current is large, and the material is small in the grinding cavity, the gradient current is small.
In addition, the feeding speed must remain uniform and stable, don't be too fast or too slow.

Regular maintenance equipment, often check whether the air supply pressure meets the pressure required for crushing,As well as the airflow mill, the equipment is running 3000 hours, or the long-term shutdown and long-term storage are used. It should be cleaned on the inner wall of the airflow grinding machine nozzle and the inner wall and attached to the material grading portion to prevent gas flow grinding effect. Impact.

ALPA composite, molten silicon micro powder Steam Jet Mill for Plastic Powder case share:
A silicon micron powder is an earlier manufacturer engaged in silicon micropowder production, and the company has strong technical strength. Advanced inspection instruments, perfect pre-sales, sales and after-sales service, can provide high-quality crystalline silicon micropowder, high-purely molten silica, high white ultra-fine silicon powder, etc. The company is committed to providing advantageous solutions and services for other functional applications such as electronic materials, special ceramics.
The company continues to innovate around customers, and has always adhered to customer-centric, quickly responding to customer needs, and tailor-made quality products for customers, and continues to create long-lasting value for customers to achieve customers
case parameters:

Hour Yield: 300kg

If there is related requirements, please call us!