Steam Jet Mill for 3D Printing Materials

In the classification operation of industrial production at this stage, STEAM JET MILL for 3D Printing Materials is mainly targeted for the effective crushing of solid particles, and it is also a common use of a common use in the product ultrafine pulverization. equipment.

Steam Jet Mill for 3D Printing Materials in today's industrial production is very extensive, usually used to smash the added value of materials, after ultrafine crushing, generally said the application is wider, Higher value, is loved by the industry.

Next, we understand the working principle of the ultrafine pulverizer.

When working, the material to be pulverized from the feed hood on the side of the hood shell, relying on the grinding roller device suspended on the main plum flower frame, rotating around the vertical axis, and itself is rotated, due to rotation The role of the grinding roller is swing outward, pressing the mill, so that the shovel shovel is sent between the mill and the abrasive ring, and the purpose of the pulverized material is achieved due to rolling rolling of the grinding roller. Warlective process: After the material is ground, the fan blows the wind into the main casing, blows the powder, and is selected from the analyzer above the grinding chamber, and the fine material is refined into the grinding chamber. The style of constructing the wind flow into the cyclone collector, and after collecting the powder, it is the finished product.
The wind flow is reflected in the wind turbine in the upper end of the large cyclone collector, and the wind path is cycle, and in the negative pressure state, the air of the circulating wind turbine increases the exhaust gas pipeline between the flowers and the middle of the main unit. Small cyclone collector for purification treatment.

How to continue Steam Jet Mill for 3D Printing Materials Life? Here are the following aspects:

1, during the production process, the temperature rise of the bearing must be regularly checked. When the temperature rises to 50 ° C, inspection should be checked, find a reason, troubleshooting.

2, when the new machine runs, the transmission belt is easily stretched, and the tightness of the belt should be adjusted to ensure the life of the belt.
3, regular inspections for the lids, promptly guarantee the quality of production and production.
4, the blades and bushing should always check the wear situation. When wear, the productivity is lowered, and the grain is thick.
5, host and gradient flow bearing oil grease lubrication, dedicated grease, and degree 265-295.
6, the cycle of the bearing is 2000 hours. The amount of the grease is filled into a 1/2 (upper test) or 3/4 (below the test), so we can't add too much grease. Otherwise, the bearing temperature is too high.
7. The spiral feeder is 4,000 hours, plus ordinary calcium based grease.
ALPA Sodium Base Steam Jet Mill for 3D PRINTING MATERIALS case sharing: The company often uses Steam Jet Mill for 3D Printing Materials, and the sodium hydrogen carbonate is required to ultrafite.The company has won many power plant dry desulfurization projects with our AlPa's cooperation.It is very satisfied with the Steam Jet Mill for 3D Printing Materials we produced.
Technical parameters:

Finished granularity: 700 目

Production capacity: 800kg


Shandong Alpa is a source manufacturer specializing in Steam Jet Mill for 3D Printing Materials, all year roundExternal customers provide equipment, welcome to inquire!