Air Classifier of Manganese Carbonate

In many crushing methods, Air Classifier of Manganese Carbonate has become one of the most mainstream pulverization techniques, which is one of the most mainstreamed pulverization techniques with a small particle size, narrow particle size distribution, high purity, high particulate activity, and good dispersibility. In particular Applicable materials such as crushing drugs such as contaminated materials.

High-speed jet enters the crushing chamber, collides with particles, multiple times in the friction of high pressure air, shear and pulverized, pulverized materials, and the assembly of rising airflow motion, under the action of the fan, In the strong centrifugal force of the rotational speed of Air Classifier of Manganese Carbonate, the thickness of the material is separated from the separation, the fine particle size of the graded wheel into the cyclone separator and dust removal, continues to be pulverized. The classifier produced by AlPa can perform local internal changes depending on the different characteristics of the material, so that it is more suitable for the grading requirements of the material. The grading machine has a greater processing amount, energy saving, simple operation, and low maintenance cost.

AIR Classifier of Manganese Carbonate's working principle airflow pulverizer, a cyclone separator, dust collector and air machine form a complete crushing system. After filtration and drying, the compressed air is injected into the crushing chamber through a high speed Ravier nozzle. At the intersection of multiple high pressure airflow, the material is repeatedly collided, friction, shear and broken. Under force, the thickness, fine product is separated, and fine particles that meet the particle size requirements are collected by a cyclone and dust collector by a grading wheel, and the crude particles reduce to the crushing area continue to break.

Super Micro Air Classifier of Manganese Carbonate Machine Maintenance and Staff:
1, often inspecting the fastening of each component, preventing it from falling off, damaging the machine.
2, each oil injection hole should be refueling, and the bearing portion is cleaned every half year to fill the lithium-based grease.
3
4, when the machine is deactivated, the external debris should be cleared, and the grease is filled with all the rotating parts, stored in the storage of air drying, non-corrosive gas.

ALPA Steel slag Air Classifier of Manganese Carbonate Case Sharing: This customer is Xi'an Steel Residue Application Technology Co., Ltd., mainly engaged in re-use research and development of steel slag. During the production process, steel slag ultrafine powder is required, screening the required steel slag micropowder, the customer investigates many domestic powder equipment manufacturers, and finally chose our ALPA vertical air classifier.

Case parameters:
Product particle size: D97: 5-75μM
Hour Yield: 200-500KG

If you have something about other crushers, you want to know, welcome to consult!