Steam Jet Mill for Fesicr

With the demand for social development and life, the industry's demand for STEAM JET MILL for Fesicr is getting bigger and higher, and the requirements for fineness, purity, and pass rate are increasing. In the current market, there is a great development space.

Steam Jet Mill for Fesicr is smashing in full-closed state, the fineness of the pulverized particles is better, the granular shape is good, the output is also large, the pulverization process is no dust production, and the material is purified by the purity after crushing, greatly saves raw materials. medicine. Steam Jet Mill for Fesicr can reach the effect of cell-breaking wall during pulverization, so that the effective component dissolution of the drug material is greatly improved, and the efficacy is also easier to be absorbed by the human body. Experts pointed out that after pulverizing the gas flow crusher, the minimal component can reach the original efficacy. During the pulverization process, it can work according to different medicinal materials and crushedness, generally use a gas flow pulverizer to pulverize the drug. It is possible to save resources between 30% and 70%.

The working principle of Steam Jet Mill for Fesicr is: the compressed air is dried, and the pulverizing cavity is entered by the nozzle in the drying. In the pulverizing cavity, the material can be pulverized by a high pressure gas stream. Thereafter, the crude material can be separated from the centrifugal force generated by the grading turbine. Particles that meet the particle size requirements are in the cyclone separator and the dust collector, and the particles collected, and the particles that do not meet the requirements continue to be pulverized.

Ultrafa Steam Jet Mill for Fesicr debugging before debugging:
1, newly installed equipment Foreign objects such as slag. In the absence of the fan and the main motor, open the implicit baffles under the feed port, allowing impurities and washing materials to be discharged from here. After the end, open the ultrafine pulverizer observation door, check whether there is impurities in the pulverizer, hammer head and ring gear have problems.
2, before checking everything is normal, the power-on starting the device, check the direction of rotation of all motors.
3. Parameter inspection setting for the two inverters of the ultrafine pulverizer's feed motor and the graded wheel motor, check if the air open, contactor, heat relay, overcurrent relay adjustment is appropriate? Return all lines all over again.
4, check whether the solenoid valve is blown normally, regulate the dust collector solenoid pulse width and blow interval.
5. Check if the cleaning of the cleaners under the brake dragon has a leakage, can be placed in the interface with the hand or fine powder, there is a feeling of suction, if there is a sealing treatment. After all of the above tests are normal, prepare the material production.

AlPa Quartz Sand Steam Jet Mill For feSICR case share: The customer needs to grade quartz sand, compared to a number of powder equipment manufacturers, and finally pass the experiment, finally choose our AlPA classifier equipment.Product particle size: D95: 45μm hour Yield: 8-12T Welcomes major quartz sand manufacturers to visit, incompetent experiments.

For more consultation, please continue to pay attention to us, or inquire.