DISC JET MILL OF ZINC OXIDE POWDER

In the classification operation of industrial production at this stage, the use of DISC JET MILL OF ZINC OXIDE POWDER is mainly targeted by solid particles, and is the case where we are more commonly used in the product ultrafine pulverization. equipment.

DISC JET MILL OF ZINC OXIDE POWDER starts to study from the following aspects:

1. Strengthen basic theoretical research, optimize process flow

Strengthen basic theory research, Based on the independent innovation development of guidance equipment, based on existing equipment, vigorously develop process optimization research and optimize process flow. For mass-produced powders, special models can be developed.

2. Improve stand-alone production, reduce unit product energy consumption

With the increasing demand for ultrafine powder products, especially large-scale dosage users increase and product quality The continuous increase in stability requirements has continued to rise for large equipment market demand. Large-scale equipment can more effectively adapt to the development trend of ultrafine powder processing and gradually expand the scale, and there is also many advantages in the energy consumption of unit products, excellent product quality and convenient management.
3. Improve product fineness, enhance the device pulverization limit

The ultrafine powder processing equipment and technical demand for particle diameter at 1 μm or less is getting stronger. Ultrafine powder will be a very important development trend in the field of ultrafine powder in the future. This is mainly due to the current large amount of high-tech and the development and production of new materials. For example, in terms of environmentally friendly building materials, the development of biomedicine materials, etc..
4. Online regulation of product fineness and particle size distribution

This development is a prerequisite requirement for ultrafine crushing lines to achieve intelligent control. Strengthen automatic control and online testing equipment and related software developments and related software in order to improve the level of equipment and reduce energy consumption.


Next, we understand the working principle of the ultrafine pulverizer.
When working, the material to be pulverized from the feed hood on the side of the hood shell, relying on the grinding roller device suspended on the main plum flower frame, rotating around the vertical axis, and itself is rotated, due to rotation The role of the grinding roller is swing outward, pressing the mill, so that the shovel shovel is sent between the mill and the abrasive ring, and the purpose of the pulverized material is achieved due to rolling rolling of the grinding roller. Warlective process: After the material is ground, the fan blows the wind into the main casing, blows the powder, and is selected from the analyzer above the grinding chamber, and the fine material is refined into the grinding chamber. The degree of consumes the wind enteringThe wind collector, after the collection, the powder is discharged, that is, the finished product.

The wind flow is reflected in the wind turbine in the upper end of the large cyclone collector, and the wind path is cycle, and in the negative pressure state, the air of the circulating wind turbine increases the exhaust gas pipeline between the flowers and the middle of the main unit. Small cyclone collector for purification treatment.

Ultra-micro DISC JET MILL OF ZINC OXIDE POWDER Installation and commissioning five major precautions

1, when the ultrafine pulverizer is fixed, it should be installed on the cement base, and the flow operation should be installed. Four rounds of front bumpers.

2, the ultrafine pulverizer should select the power machine according to the prescribed power supply, and ensure its rated working speed, it is strictly forbidden to speed up, otherwise it will cause personal safety accidents.
3, the ultrafine pulverized machine leather pulley should be with the power wheel, the axis is parallel, the triangle must and the groove on a flat line, rotate with hand, and tighten appropriate. There is sometimes hit when transportation, and whether there is an abnormal phenomenon such as bumps in front of the inspection machine, if there is a timely adjustment or exclude.
4, pick up the power, let the machine operate in the working condition, control the switch position, should be free, keep the workplace smooth, and ensure convenient operation.
5, after the connection is completed, the bearing should fill the butter, the bearing cover is the semi-automatic butter cup, and the cacrid is added to the bottom, which can be repeated several times, and the oil should be worked. Keep the bearing life.


ALPA Xixia Powder DISC JET MILL OF ZINC OXIDE POWDER Experiment: A mining company needs to be sorted by Xialuden powder, through the experiment of our ALPA, can do product particle size: D90: 16.8μm Yield: 246kg / h 加 加

Welcome to the majority of major manufacturers in Xixia stone grading to the factory to visit, and collective experiments.

Welcome everyone to continue to pay attention to our website to learn more!