Fluidized Bed Jet Mill of Iron DEXTRAN

With the continuous increase in society, FLUIDIZED BED JET MILL of Iron DEXTRAN is constantly improving in terms of performance, finished product quality, service life, etc., which is very good to process raw materials into micrometers or even nanoscale fine powder, and A wide range of applications in many areas such as chemical, food, pesticides, cosmetics, dyes, coatings, and electrons.

1. The grinding temperature is low, which can be pulverized, and low melting materials. According to the high-speed jet, the Tomson effect, when the gas is thermally expanded, the gas will cool itself, thus canceling the heat generated by collision and friction.
2, the production cycle is short, and the abundance rate is high. Due to high speed collisions and closed crushing, the probability of collision between materials is large, and dust is not leaked.
3, a product having high purity (less pollution), uniform particle size distribution (D95 cumulative frequency) can be obtained.
4. Some materials that require wet pulverization can also be pulverized by airflow pulverization to achieve uniform and small powder.
5, a variety of joint operations can be implemented while drying can be achieved. It can be seen that the research hotspot of the air pulverizer is very highlighted, and it plays a pivotal role in the pulverization process of the pharmaceutical industry.
Fluidized Bed Jet Mill of Iron DEXTRAN features
1. Suitable for ultrafine pulverization of dry powder materials. The impact is large, up to 2.5 Mach. General materials are easily crushed to 1-10 microns.
2, relative fluidized bed airflow pulverizer has a good pulverization effect on viscous materials, and the crushing process does not generate clogging materials that cannot be pulverized.
3, heating, grinding process due to compressed gas nozzles, temperature drop, no mechanical friction, the grinding process does not warm, broken, suitable for low-melting thermal sensitive materials.
4, easy equipment, convenient cleaning, convenient operation and maintenance, small area, low noise, no vibration, and so on.

Here we take a Fluidized Bed Jet mill knowledge of lubricants under the terms of Iron dextran learning.

Selection Fluidized Bed Jet mill of Iron dextran lubricant products to be selected and the type of lubricant according to the label instructions on the equipment manuals. General Fluidized Bed Jet millOf Iron Dextran equipment manufacturer's production and use of lubricants is very clear. This requires we choose in actual work. According to the work conditions of the equipment. For machines with higher temperatures, high viscosity oils are used, ensuring the thickness of grease under normal operating conditions, ensuring smooth flow of lubricants in low temperature environments; when the mechanical working speed is high, the viscosity is selected. Smaller oil ensures good permeability and fluidity. If the grease is too thick at this time, it will increase the operational resistance. When the load is relatively large, the oil having a slightly high viscosity should be used to ensure the thickness of the grease.

When purchasing a Fluidized Bed Jet Mill of Iron DEXTRAN lubricant, it should help the physical properties and chemical properties such as viscosity, flash point, corrosion resistance, etc., but also combined with the manufacturer's instructions, considering comprehensive benefits Under the premise of management benefits, minimize the type and quantity of oil to reduce financial costs. The storage of lubricants and storage of oil plays an important role in the performance of the oil. When the lubricating oil is in contact with the non-ferrous metal, it will oxidize, which affects its performance, and corrosion during use, causing damage to the machine. Therefore, in the storage process, it should be avoided in contact with copper. The barrel oil should be kept cleaned and ventilated, protected from light. The storage time of lubricating oil should not be too long to avoid deterioration.

The above is the Knowledge of the pulverizer lubricant purchased by the Fluidized Bed Jet Mill of Iron Dextran

ALPA Sulfate Fluidized Bed Jet Mill of Iron Dextran case Sharing: The customer is a Saudi company, which needs to be graded for the potassium sulfate, and investigate the international powder equipment company, and finally chose our AlPA classifier equipment.

Today, I will introduce you to here. If you want to know more, please continue to pay attention to our website.