Fluidized Bed Jet Mill of Haricot Vert

FLUIDIZED BED JET MILL OF Haricot Vert mainly applied the pulverization mechanism determined that its scope of application, high finished product, widely used in chemical, minerals, metallurgy, abrasives, ceramics, refractories, pharmaceuticals, pesticides, food , Health products, new materials and other industries.

With the increasing social demand, Fluidized Bed Jet Mill of Haricot Vert's performance, product quality, etc. face huge challenges. Therefore, ALPA Technology Co., Ltd. persisted unremitting, continuously improved the superfine grade strength, particle size distribution, particle crystal form, etc. to achieve more production.
ALPA, strive to achieve low energy consumption, high yield, non-pollution in ultra-fine classifier, achieve good granularity, dispersion, unique and potential performance of the product, improve the competitiveness of powder classifier, environmental protection and low Power performance.

Next, we understand the working principle of the ultrafine pulverizer.
When working, the material to be pulverized from the feed hood on the side of the hood shell, relying on the grinding roller device suspended on the main plum flower frame, rotating around the vertical axis, and itself is rotated, due to rotation The role of the grinding roller is swing outward, pressing the mill, so that the shovel shovel is sent between the mill and the abrasive ring, and the purpose of the pulverized material is achieved due to rolling rolling of the grinding roller. Warlective process: After the material is ground, the fan blows the wind into the main casing, blows the powder, and is selected from the analyzer above the grinding chamber, and the fine material is refined into the grinding chamber. The style of constructing the wind flow into the cyclone collector, and after collecting the powder, it is the finished product.
The wind flow is reflected in the wind turbine in the upper end of the large cyclone collector, and the wind path is cycle, and in the negative pressure state, the air of the circulating wind turbine increases the exhaust gas pipeline between the flowers and the middle of the main unit. Small cyclone collector for purification treatment.

1. Preparation before the pulverizer is started to check whether the host, joint, pipeline, and the valve are normal and working properly.
2, open the pulverizer

(1) Open the compressor power supply, dustpress pressure valve and the main air valve, open the power switch of the pulverizer, turn on the power switch.

(2) From zero, gradually adjust to the specified speed.

(3) Open the fan, cyclone separator, dust removal and charger power, open the total power box, set the frequency of the inverter, and then start charging.
(4) The particle size of the finished product can be adjusted according to the frequency and carrying capacity of the grading wheel..
3, pulverizer shutdown sequence is: inverter - feeder - main valve compressor - Compressive plane impeller motor - cyclone material, dust removal switch - fan - General power supply air compressor.
4, eddy current pulverizer maintenance and maintenance

(1) Periodically lubricate the eddy current pulverizer, but the lubricating oil should not be too large to prevent too high of the bearing temperature.
(2) Check the wear of impeller, helical conveyors, and crushing nozzles.
(3) After pulverizing the material, the rubber powder should be removed to avoid clogging, thereby affecting the crushing effect.
(4) After the filter bag is filtered, it should be cleaned or replaced.
5, eddy current pulverizer precautions

(1) When the device is running, the unloading port cannot be reached, and the accident occurs.
(2) The rotational speed of the impeller should not exceed the specified requirements, otherwise the temperature is too high, the impeller and the electric chance are damaged.
(3) Regularly check the safety valve to ensure safety.
ALPA Battery Fluidized Bed Jet Mill of Haricot Vert Case Sharing: Shandong Yantai Chemical Materials Company, in 2020, I purchased a specially pulverized battery material from our company. Fluidized Bed Jet Mill of Haricot Vert. Technical parameters finished particle size: D50: 8-12UM production capacity: 50kg / h

If you still have questions, you can directly contact ALPA Technology Co., Ltd., the company's leading product Fluidized Bed Jet Mill of Haricot Vert system is currently in The grading field of tiny particles that cannot be treated with dry airflow is obtained, breaking through the boundaries of dry grading, equipment system in rare earth polishing powder, metal powder, silver powder, tungsten powder, alumina, battery material, ceramic powder, carbonyl group Nickel powder, iron powder, toner, resin, pigment, mica powder, cosmetics and other industries have won a wide range of applications, warmly welcome users to come to consult and purchase, our company's equipment is manufactured, the size is complete, there is a suitable for you !