Jet Mill of Olive Shell

Jet Mill of Olive Shell As the name, it is used in a mechanical equipment used in the production area, which is mostly used in pulverizing particles, fast pulverity, good accuracy.

Jet Mill Olive shell work process Mainly, the material is accelerated by the nozzle to enter the soonic flow, and the compressed air enters the pulverization region, and the material is fluidized, each particle has the same motion state. In the pulverized region, the accelerated particles collide with each other in each nozzle. The pulverized material is delivered to the grading area through the upper gas stream, and the fine powder of the particle size is selected by the horizontally arranged grading wheel, and the coarse powder that does not reach the granularity requirement, returns to the pulverization region to continue pulverization. Put the qualified fine powder with the airflow into the high-efficiency swirl separator, and purify the dust gas by the dust collector, discharged into the atmosphere, and the entire pulverization process reaches the high requirements of environmental protection.

The qualified fine powder is delivered into the hierarchy of the upper portion of the pulverizer through the rising airflow. The classifier classifies the qualified materials and enters the cyclone collector (if a product having several particle size is required, add a plurality of vertical turbine classifiers). Fine tails are delivered into the bag dust collector via airflow. After filtration, the tail enters the exit of the lower part of the filter and empty the air.
Native components: classifier, grinding, grading, synchronous completion, to adjust the speed of the classifier through the frequency conversion speed, can adjust the fineness of the product. For example, if a machining process requires a number of particle size sections of the product, then two to four can be increased on the basis of a standard classifier, so that the machine becomes the \"two five\" machines of pulverization and grading.

If you want to make a big performance during work, maintenance is unable to work, how do you maintain a grading machine?
1. If you clean the classifier, you need to pay attention The motor should not be stained with water, and the shaft is also the same.

3, usually pay attention to lubrication and maintenance of the bearing of the classifier.
4. If the precision classifier works for 1,500 hours, remember to add lubricant.

ALPA precipitation method White Carbon Black Jet Mill of Olive Shell Case Sharing: The customer is an Egyptian company, from our English official website, we have ultrafine pulverized experience in which we have deposits. There are a number of cooperative customers. Through the incoming experiment and on-site visit. Determined our ALPA strength, and finally purchased Jet Mill of Olive Shell from our company.