Steam Jet Mill for Printer Toner

STEAM JET MILL for Printer Toner is a clean, efficient, high-level, high-yield of advanced crusher model in the pulverization of Western medicine raw materials, from a few of dozens of micro test Large-scale production of hundreds of tons of production, air flow milling with narrow particle size distribution, average particle size; good powder shape, high product purity; suitable for low melting point, thermal drug; good sealable, low pollution Easy to operate; crushing - mixed - dry online operations have been widely recognized by the company.

Steam Jet Mill for Printer Toner mainly after accelerating compressed air or inert gas, using high-speed elastic fluid (300 to 500 m / s) or overheating steam (300 ~ 400 ° C) energy, Between the particles, between the gas and the particles, the particles and the wall and other components produce strong impact, shear, collision, friction, etc., at the same time, under the action of the airflow rotation, or with the classifier, Make the thick particles to achieve ultra-fine pulverization.

Steam Jet Mill For Printer Toner is a common preparation method for pharmaceutical powder, suitable for antibiotics, enzymes, low melting points and other thermal drugs. With the continuous advancement of ultrafine pulverization technology, it will play an increasingly important role in the pharmaceutical industry.
The working principle of Steam Jet Mill for Printer Toner is a complete crushing system composed of crusher and cyclone separator, dust collector and air blower. After the compressed air is filtered, the high-speed nozzle is sprayed into the crushing chamber, and the material is pulverized by repeated collision, friction and shearing at the intersection of the multi-high pressure airflow. The crushing material moves together with the rising airflow to the classified area with the suction of the fan. Under the action of centrifugation, the thickness of the material is separated, and the graded cyclone is required to grade the cyclone to enter the cyclone dust collector, and the coarse comminution continues to be pulverized down. Suitable for dry crushing of various materials that are less than 9 in the Moh, especially for high hardness, high purity, high value-added crushing materials. It includes a vertical hierarchy device. The size of the product can be adjusted between D97: 8 and 150 microns, with a good particle shape and a narrow particle size distribution. Low temperature without media crushing. It is especially suitable for thermal sensitivity, low melting point, sugar-containing and volatile substances. The grinding process is mainly dependent on the collision of the material itself, and is different from the impact of the mechanical crushing blade or the hammer on the ground on the ground, so the equipment is high, and the product is purity.

In the production process, we should pay attention to maintenance and maintenance of Steam Jet Mill for Printer Toner.

1. In the production process, the bearing temperature should be checked regularly. When the temperature rises to 50 degrees CelsiusWhen you are on, you should check the machine to find out the cause and troubleshoot.

2, when the new machine is running, the transmission belt is easily elongated. Pay attention to adjust the appropriate tightness of the belt to ensure the life of the belt.

3, which should be regularly inspected, replace it in time to ensure quality and production.
4, the wear of the blade and lining should be checked regularly. If the productivity is lowered after the wear, the grain size is thicker and the wear is immediately replaced.
5, the host and the hierarchical flow bearing use grease lubrication.

6, the replacement period of the bearing is 2000 hours, the amount of the grease is 1/2 or 3/4 of the bearing cavity space. (Lower test) The temperature of the bearing will be too high.
7, the spiral feeder changes the fat period of 4,000 hours, plus ordinary calcium based grease.
8, in the output shaft E, i.e., pulley E, avoid heavy hush, damage to the part.
9. It is strictly forbidden to turn the handle of the handwheel in the stop.
10, the lubricator used by the governor adopts N32 alkaline high-zinc high anti-milling oil, and the reducer uses 401 universal lubricants and cannot be replaced by other machines.
11. After 3000 hours, the new oil should be replaced, and then used after 500 hours of oil for the second change, then use it after 1000 hours.

ALPA Xixia Powder Steam Jet Mill for Printer Toner Experiment: A mining company needs to be powered by Xixia powder. It can be used by the experiment of our ALPA. / h 加 加 量
Welcome to the majority of major manufacturers with Xixia stone graded demand to the factory, and collective experiments.

The equipment market is rapidly changing. At present, the airflow classifier has certain needs in the market, but the society is constantly evolving, no matter what industry needs to keep up with the times, it can lead the industry.