Steam Jet Mill for Andesite

In numerous pulverization mode, STEAM JET MILL for Andesite has become one of the most mainstream pulverization techniques with a small particle size, narrow particle size distribution, high purity, high particulate activity, and good dispersibility. In particular Applicable materials such as crushing drugs such as contaminated materials.

The overall development trend of China's material ultrafine crushing technology is to make a more ultra-fine pulverized equipment to various types of ultra-fine pulverization equipment towards low-cost, high efficiency, strong dispersibility, good dispersibility and stable quality. High technical requirements.
Steam Jet Mill for Andesite Engineering Technology will need more and more high-purity ultrafine powder, and ultrafine powder technology will play an increasingly important role in high-tech research and development. Although high-purity ultrafine powder is prepared by chemical synthesis, it is too high, which is extremely difficult for industrial production. The main means of obtaining the ultrafine powder is still mechanical and pulverized, and ultra-fine pulverization technology is a combination of many technologies. Its development also depends on the progress of the relevant technology. Therefore, the main development trend of ultrafine pulverization equipment has been developed with fine classified equipment with ultrafine pulverized equipment. Ultrafine pulverized equipment with low energy consumption, small land, and has high handling capacity. Integrated development of equipment and process research. Ultrafine pulverization and supporting equipment must adapt to specific bored features and product indicators, and the scale model must be more adapted.

1, strictly follow the operating procedures;
2, easy to damage parts should pay attention to time check, timely replacement .
3, the device body has no rotating parts, which is not affected by the lifetime of the bearing. However, due to the difference in powder hardness, the degree of wear is different, especially the wear of the hierarchy knife tip, our company's body part is made of special material, the tip service life is at least more than one year, the knife tip is more than 1 cm or more It will affect the grading accuracy, in order to avoid affecting product quality, it is recommended to contact us to replace the knife pointer;
4. It is recommended to use a long filter device to improve equipment stability, and ensure grading precision.
Ultraflight Steam Jet Mill for Andesite is an ultra-microclinated device for dry material, which is widely used in various industries. Let's take a brief introduction to its daily maintenance content.

2, easy to wear parts should pay attention to the degree of wear, pay attention to and do the preparation for replacement of parts.
3, for the top surface of the chassis of the active device, it is necessary to remove dust and other debris avoiding the active bearing can't move on the chassis when the machine can encounter the material that cannot be broken.Incident, causing an accident.
4, all loads of the machine are bearings, so good lubrication and bearings have a large relationship, it can directly affect the service life of the machine and the operating rate, so the amount of lubricating oil required to be injected should be reached. Good seal.
5, the sleeper installed is easy to loosen, and it must be checked frequently.
6. Note that the operation of each part of the machine is normal.
7. If the rotating gear is in operation, if there is a hitting sound, it should be stopped in time and remove the fault.


ALPA Quartz Sand Steam Jet Mill for Andesite Case Sharing: This customer needs to be air-flowing to quartz sand, compared to a number of powder equipment manufacturers, and finally pass the experiment, finally choose our alpa Grading machine equipment. Product particle size: D95: 45μm hour Yield: 8-12T Welcomes major quartz sand manufacturers to visit, incompetent experiments.

The equipment market is changing. At present, Steam Jet Mill for Andesite has certain demand in the market, but the society is constantly evolving, no matter what industry needs to keep up with the times, they can lead the industry.