Air Classifier Mill for polyacrylic acid

Air Classifier Mill for polyacrylic acid is good, only need to be produced in a smooth ground, low noise, can avoid dust leakage during the pulverization process, which is favored by the powder industry.

Air Classifier Mill for polyacrylic acid is reasonable, stable operation, low energy consumption, large crushing capacity, small size, no malfunction, convenient cleaning and maintenance. Typically, the outer casing uses water-cooled and self-produced air volume, transporting a powder material, low temperature rise, and the thermal material can be pulverized. The blade wear is reduced by using a large number of ultrasonic vortices generated by the back surface of the blade and the high frequency pressure. Compact, no dust overflow.

1. High yield, low energy consumption, high grading efficiency.
2. Particle size: This machine uses impeller to grade. Stable classification process and special sealing measures effectively prevent the leakage of crude particles, so that the product has no large particles, the particle size is concentrated, and the grading accuracy is high.
3. The structure is reasonable, and 1-6 kinds of products can be produced simultaneously according to user requirements.
4. Strong applicability: Can form closed or open joint operations with various mill (air mill, mechanical mill, ball mill, thundering machine, vibrating mill, etc.).
5. High degree of automation.
How to properly operate the Air Classifier Mill for Polyacrylic Acid?
Before the device is turned on, the connection site, sealing and line, etc., and everything is not a problem before running the powder classifier.
The boot should be operated in the boot order. 3 minutes before shutdown should be stopped, then shut down, the order is opposite to the boot order.
The amount of feed should be determined according to the size of the powder grading machine load, ensuring that the host is in the state of rated load. The particle fineness can be adjusted to adapt to the grading requirements.
Debutors such as the heat-sensitive material, then the power of the main motor is slightly lower than the rated power. The size of the air volume in the delivery line can be achieved by adjusting the damper of the fan.

Technical parameters
Finished fineness: D50: 3μm
Production capacity: 2-20kg / h

ALPA also believes that future airflow crushing technology will become better and better, users who need to purchase such products can contact us.