Air Classifier of Silicon Oxide

Air Classifier of Silicon Oxide This product technology has received extensive attention from the industry. The grinding mechanism of Air Classifier of Silicon Oxide is mainly used to determine its wide range of applications, high fine, typical materials: super hard diamond, silicon carbide, metal powder, high purity requirements: ceramic pigment, medicine, biochemistry, medicine. Air Classifier of Silicon Oxide converts the normal gas from the gas source portion to nitrogen, carbon dioxide and other inert gas, is an inert gas protection device for use in the flammable and explosive, oxidative material, chirrinating, grading, and processing.

In the production process of crushing using Air Classifier of Silicon Oxide, the ultrasonic air flow generated by the equipment can constantly collide between materials, and this supersonic airflow can also produce raw materials. A very good impact, and then the material can also have a good crushing effect with the inner wall of the equipment.

Air Classifier of Silicon Oxide features: The high-efficiency pulverizer has the advantages of simple structure, convenient disassembly and packing; the material is broken and cleaned; all indoors, stainless steel production, acid resistance, high corrosion resistance Factory, and scalp can meet health requirements; stable operation, convenient movement, low noise universal crusher's crushing effect, low energy consumption. Compact shape, light weight, can be moved; high-efficiency fine breakboard has simple operation, no vibration, low noise, power saving, security, etc., especially for Chinese medicine clinics, hospital pharmacy, pharmacy, health products sales counter, Cutting, research institute, laboratory sample analysis and family food crushing; replacing traditional mortar, work efficiency can be increased by 50 times.

1. First, the gap of the hammer screen can be adjusted: the friction on the screen changes varies from the distance between the material and the screen, and the friction is different. Improve the hammer speed and hammer material efficiency by adjusting the hammer net gap. However, during the production process, the screens they use are different, the raw materials are different, the hammer screening gap needs to be adjusted; in the crusher, the crusher is not very good at the beginning, but after a period of time Work, the particles inside the crusher also changes; in the grinding machine parts, the hammer head is easily worn, and the gap between the hammer head and the screen is increased, and the yield is also declining, it is difficult to maintain.
Of course, in order to test the yield of a crusher, for some of the raw materials, for some screen holes, in order to determine the appropriate hammer sieve gap and suction, the useful life of the screen and the hammer can be obtained in a short time. Very high grinding efficiency data. However, in the feed grindingIn production, such specific measurement data, according to the operator's work experience, the technical content of the crusher itself is two things. People with enrichment of experience and labor experience also require higher operating costs. When the hammer is worn, the gap between the hammer and the sieve increases, the friction is reduced, and the abrasive efficiency is lowered.
2.Air Classifier of Silicon Oxide mainly requires a reasonable use of reverse glitch: mainly to rush the side hair of the screen into the inside, greatly increase the friction, but this method is not used for a long time. After the globi polishing, the efficiency is lowered. It lasts for 30 minutes to 1 hour.
3. Put the friction piece into the AIR Classifier of Silicon Oxide: The friction sheet has the effect of the material ring, but the effect is limited. First, the teeth of the friction plate are in front of the hammer head, the friction surface is small, and the hammer is long-lasting; if the sieve area is too small, the output screen area will be reduced.
For any of the equipment, everyday maintenance can be performed, to ensure that the equipment can run for a long time, so daily is critical to the maintenance of Air Classifier of Silicon Oxide.

ALPA Lithium IX AIR Classifier of Silicon Oxide Case Sharing: This customer is not more than home and abroad by comparing the performance of the phosphate of iron phosphate in our entire production. Other powder equipment companies are poor, and even in some aspects there are unique advantages. After experimenting, the company purchased Air Classifier of Silicon Oxide.
Technical parameters:
finished particle size: D50: 3μm
Production capacity: 400kg

Shan dong alpa mainly engaged in the production and development and service of Air Classifier of Silicon Oxide product technology, Welcome to consult. With good quality and service, affordable prices, customer-oriented attitudes provide airflow crushing products and services.