Spiral Jet Crusher Of Bentonite

Environmentally friendly Spiral Jet Crusher's Bentonite has gradually become the market leading to mechanical equipment, and the modern new mechanical equipment in the mechanical processing and manufacturing industry in the stage has gradually replaced traditional roughing and mechanical production. It has also become a new dominant leading to the realization of technological innovation and upgrading at this stage.

Spiral Jet Crusher Of Bentonite is used to crush the item, then the crushing items and tailings will also be discharged in time. When the crusher discharges these crushing items, there will be dust.

How do I solve if the dust is too big?

1. Install the dust collector: Generally, this dust collector can now be used with a crusher. It puts dust income trapping bag, dust is filtered by the dust box;

2, cloth bag dustproof: cloth bag is tightly pulled with machine, prevent leakage drain. Attention should be paid attention to parking, and the dust should be cleaned in time.
3, woodllar or pool dust removal: mainly using the ventilator to vacuum to the crushing, then vacuum, or vacuum through the pool.

The above three dust removal methods can achieve a good dust removal effect, and can solve the problem of excessive dust, which is generally installed before working to prevent excessive dust.


The working principle of Spiral Jet Crusher Of Bentonite is: the compressed air is dried, and the pulverizing cavity is entered by the nozzle. In the pulverizing cavity, the material can be pulverized by a high pressure gas stream. Thereafter, the crude material can be separated from the centrifugal force generated by the grading turbine. Particles that meet the particle size requirements are in the cyclone separator and the dust collector, and the particles collected, and the particles that do not meet the requirements continue to be pulverized.

Spiral Jet Crusher Of Bentonite's daily maintenance is a very important part, which introduces the maintenance method for Spiral Jet Crusher's Bentonite.

1. When the machine starts or starts, the appropriate amount of grease should be applied to ensure its life.

2. Check if the screws and nuts of each component are tightened. Check if the belt is smashed, whether it is tight.

3, regularly check the reliability of the equipment, prevent accidents or accidents.

4, the direction of operation of the spindle should be correct. If it is incorrect, it should be handled in time to avoid damage to the machine.
5, equipment maintenance should be carried out by professional and technical personnel, and others must not be carried out to avoid damage to the equipment.
6, electricalParts and routes should be checked regularly, whether it is intact, and it is reliable.
7. The equipment should be cleaned in time to prevent the next use to avoid contaminating materials.

ALPA Soconne Spiral Jet Crusher Of Bentonite Case Sharing: The company is a professional manufacturer of active biological extracts. It needs a super-smashing machine that meets GMP requirements, examines a number of powder equipment manufacturers, and finally purchases.Our Alpa's Spiral Jet Crusher Of Bentonite.
Technical parameters:
Finished granularity: 100 full pass

Production capacity: 120kg

Shandong Alpa is a source manufacturer specializing in Spiral Jet Crusher's Bentonite, all year round for domestic and foreignCustomers provide equipment, welcome to inquire!