DISC JET MILL of Silicon Oxide

In numerous pulverization mode, DISC JET MILL of Silicon Oxide has become one of the most mainstream pulverization techniques with a small particle size, narrow particle size distribution, high purity, high particulate activity, and good dispersibility. Especially suitable for crushing drugs such as contaminated materials.

In the production process of breaking using DISC Jet Mill of Silicon Oxide, the supersonic gas stream generated by the device can constantly collide between materials, and this supersonic airflow can also be used for raw materials. A good impact is produced, and then the material can also achieve a good crushing effect with the inner wall of the equipment.

DISC JET MILL OF SILICON OXIDE Principle: When the compressed gas enters the pulverizer by the feeder, the pulverized raw material enters the pulverizer, there are multiple pulverized nozzles per circumscribed, and the supersonic air flow is sprayed, so that the material is high-speed The impact and the material collide with each other, friction and pulverize, the grading tube separates the thicker particles, the crude particles continue to be pulverized, and after the internal closed circuit is pulverized, ultrafine powder can be obtained in the discharge port. 1. Suitable for dry ultrafoil. Due to the large impact speed, it can reach 2.5 Mach or more. It is easy to obtain 1-10 micron particles, depending on the material properties, it is possible to obtain less than 1 micron particles. 2. Because there is a closed-circuit classification mechanism inside the pulverizer, the product is thick The particles are constantly pulverizing, and therefore the particles are uniform, small particle size distribution ranges are obtained. 3, the device has short-striped time, simple structure, convenient operation, small area, low noise (72 decibel) and no vibration. 4, the efficiency of the pulverization is high, which can be pulverized, and the purity of the pulverized article can be maintained.

The quality of different manufacturers, the quality of the equipment will be different, and DISC JET MILL OF Silicon Oxide is decided to have different prices. When we purchase goods, we will pay attention to quality and prices, but when buying equipment, it is not easy to find high cost-effective factories. There are two reasons for causing price differences. Some manufacturers blindly cut prices, but in terms of material consumption, they will choose inferior materials to save costs and fees, which will not only harm the customer's interests, but will have a negative impact on the entire industry. Another situation is that some large manufacturers have raised the price of equipment, equipment and general quality, resulting in high equipment prices to give the equipment. Through the above analysis, customers are required to conduct field inspections when purchasing a crusher, from equipment quality, plant scale and after-sales service, etc., to find the right equipment.

AlPa Steel Slag Disc Jet Mill of Silicon Oxide Case Sharing: This customer is a steel slag reuseTechno, the company mainly engaged in steel slag sorting project.Through the experiment, our AlPA classifier reached customer needs.
Product particle size: D80: 23.4
Yield: 175kg / h 加 加 加

The above is the use of DISC JET MILL OF Silicon Oxide, you want to know other crushersKnowledge friends can pay more attention to us!