Fluidized Bed Jet Mill of Resin

FLUIDIZED BED JET MILL of Resin is a mechanical equipment applied to the production area, which is mostly used in pulverizing particles, fast pulverity, good accuracy.

Fluidized Bed Jet Mill of Resin A complete set of crushing systems. After the compressed air is dried, it is sprayed into the pulverizing chamber by the Lavar nozzle, and the material is repeatedly collided, friction, shear and pulverized, and the crushing material is pulled down with the wind turbulence. Airflow movement to the hierarchical region, under a powerful centrifugal force generated by high speed rotation, so that the crude material is separated, and the fine particles that meet the particle size requirements are collected by the grading wheel into the cyclone and the dust collector, and the crude particles drops to the pulverizer to continue pulverization. . Since Fluidized Bed Jet Mill of Resin is simple, it is easy to manufacture, so it is widely used.

Fluidized Bed Jet Mill of Resin's working principle airflow pulverizer and cyclone separator, dust collector and air machine formula into a complete crushing system. After filtration and drying, the compressed air is injected into the crushing chamber through a high speed Ravier nozzle. At the intersection of multiple high pressure airflow, the material is repeatedly collided, friction, shear and broken. Under force, the thickness, fine product is separated, and fine particles that meet the particle size requirements are collected by a cyclone and dust collector by a grading wheel, and the crude particles reduce to the crushing area continue to break.

Fluidized Bed Jet Mill of RESIN Vibration The reason and solution can be carried out from the following aspects:
1, the hammer installation error in the maintenance assembly. When the hammer is turned off, in order to prevent the weight of the rotor from losing balance, all the hammers in the pulverizer must be turned out together, otherwise it will have a strong vibration in the operation.
2, the difference between the weight of the two sets of hammer exceeds 5 grams. The method of excluding is to adjust the weight of the hammer, so that the difference between the two sets of weight is less than 5 grams.
3, individual hammer card is too tight, there is no open in operation. After the stop, turn the observation with hand and find a way to turn the hammer flexible.
4, other parts of the rotor are unbalanced, and the adjustment balance needs to be carefully checked.
5, the spindle bending deformation. The solution is to school straight or replacement.
6, the bearing gap exceeds damage. It is generally used to solve the problem.
7. The bottom angle fixing nut is not fixed in a fixed or running. The solution is tightening.

Alpa Aluminum Silicate Fluidized Bed Jet Mill of RESIN Experiment: A environmental protection technology company needs to grade aluminum silicate ultrafine powder due to production needs, becauseDetermining the need can not achieve the demand, so the experiment can be experimentally, and the aluminum superfine powder supplied by the company can be classified by experimenting our ALPA air grade machine equipment, and finally the product particle size obtained by the experiment: D90: 18.3μm, Yield:460kg / h addload.
Welcome all kinds of powder grading requirements manufacturers, to the factory, incoming experiment.

Shan dong alpa mainly engaged in the production and development and service of Fluidized Bed Jet Mill of Resin product technology, welcome to come to consult.With good quality and service, affordable prices, customer-oriented attitudes provide airflow crushing products and services.