Jet Mill of Silicon Powder

With the development of society, the application of Jet Mill of Silicon Powder has become more large.

Jet Mill of Silicon Powder features:

1, which contains vertical hierarchical devices, product size D97: 8 150 microns adjustable, granular shape, and narrow particle size distribution. It can be used in series with multi-stage classifiers, or producing multiple granular products at a time.
2, this device is disassembled and cleaning, the inner wall is smooth, and there is no dead angle. The entire system is closed, less dust, low noise, clean and hygiene production process.
3, the control system uses program control and easy operation.

JET MILL OF Silicon Powder is designed and developed using a mixed powder spraying principle. Suitable for pharmaceutical, food, chemical and other industries. It is widely used. Cold source forms a closed circuit circulation system, which takes advantage of energy and energy conservation: Wenjing pulverized can drop to zero down 196 degrees, depending on the brittle temperature of the material, the temperature can be controlled by the pulverization process, select the best grinding temperature, reduce the pulverization fine The degree can reach 10-700 energy consumption, and even reach micron wood fineness.
Jet Mill of Silicon Powder's daily maintenance
1, during the production process, the temperature rise of the bearing must be checked, when the temperature rise exceeds 50 ° C, should be closed, and the reason is to rule out the fault. .

2, when the new machine is running, the drive belt is easy to elongate, and should pay attention to adjust the appropriate looseness of the belt to ensure the work life of the belt.

3, if the loss case should be checked frequently, replace the quality and production volume in time.

4, the blade, the bushing should often check the wear situation. If the wear is worn, the productivity is lowered, and the particle size is replaced after the particle size is replaced.

5, the host and the graded flow bearing are lipids, and the No. 2 special lipids are used 265-295.
6, the replacement period of the bearing is 2000 hours, and the amount of the grease is filling the amount of the space in the bearing cavity (episode) or 3/4 (lower test) cut, not too much to fill the grease, otherwise The bearing temperature is too high.
7. The spiral feeder has been changed during the change of the lipid of 4,000 hours, and the calcium-based grease is added.


ALPA Potassium Potassium Potassium Powder Case Sharing: This customer is mainly engaged in the development of high energy chemical energy development. The study needs a device that can make ultraf fine pulverized in high potassium permanganate. Finally, I bought a Jet Mill of Silicon Powder in our AlPa.
Technical parameters:
Finished granularity:
100-325 目

Production capacity: 5kg

Jet Mill of Silicon Powder introduced for everyone, you can make simpleUnderstanding, users who need to purchase eddy current pulverizer, disc air shredder, ultrafine crusher products please contact us