Fluidized Bed Jet Mill of PTFE DTFE

Today's industrial requirements have significantly improved, and thinner powder is conducive to the deep processing of the product, thus makes the product more value. The FLUIDIZED BED JET MILL of PTFE DTFE can effectively improve the level of massage of materials, and greatly improve productivity. Fluidized Bed Jet Mill of PTFE DTFE has received much attention, and the prospect is also optimistic about many people.

Crushing product except for particle size, there is also a narrow particle size distribution, smooth particle surface, particle shape regular, high purity, high activity, good dispersibility. Since the Fluidized Bed Jet Mill of PTFE DTFE generates a Juromon cooling effect during the pulverization process, it is also suitable for ultrafine pulverization of low melting and thermal materials. Fluidized Bed Jet Mill of PTFE DTFE The gas-resistant ratio is an important technical parameter and important indicators.
If the gas is too small, the kinetic energy of the airflow will be insufficient, which will affect the fineness of the product. However, if the gas ratio is too high, not only waste energy, but even the dispersion performance of certain particulate materials will also be deteriorated.

When the particle size of the feed is smashed, the particle size of the feed is more stringent. In the case of titanium powder, when pulverizing the calcined material, it is necessary to control 100-200 mesh; the material after the pulverization surface is generally 40-70 mesh, and cannot exceed 2-5 mesh.

Fluidized Bed Jet Mill of PTFE DTFE has the following advantages: The ultrafine classifier is achieved by a pneumatic conveyor, a high speed collision to achieve a purpose. Using wind energy to become powder, the traditional screening procedure is canceled. Each independent operation, complete function, compact structure, stable technical performance, high noise, high efficiency, beautiful appearance, flexible use, wide adaptation, non-powder, adjustable powder, easy to repair, And dry non-fibrous materials and minerals have an ideal effect.

Super Fluidized Bed Jet Mill of PTFE DTFE Installation and Debugging Five Precautions

1, when the ultrafine pulverizer is fixed, it should be installed on the cement base, and the flow operation should be installed in front of four rounds. Boot strip.
2, the ultrafine pulverizer should select the power machine according to the prescribed power supply, and ensure its rated working speed, it is strictly forbidden to speed up, otherwise it will cause personal safety accidents.
3, the ultrafine pulverized machine leather pulley should be with the power wheel, the axis is parallel, the triangle must and the groove on a flat line, rotate with hand, and tighten appropriate. Sometimes it will be hit during transportation. If there is an abnormal phenomenon such as bumps in front of the machine, if you have timely adjust or exclude.
4, pick up the power, let the machine operate in the working condition, control the switch position, should be free, keep the workplace smooth, and ensure convenient operation.
5, after the connection is completed, the bearing should fill the butter, the bearing cover is the semi-automatic butter cup, and the cacrid is added to the bottom, which can be repeated several times, and the oil should be worked.Keep the bearing life.

AlPa Quartz Sand Fluidized Bed Jet Mill of PTFE DTFE Case Sharing: This customer needs to grace quartz sand, compared to a number of powder equipment manufacturers, and finally pass the experiment, finally choose us.ALPA classifier equipment.Product particle size: D95: 45μm hour Yield: 8-12T Welcomes major quartz sand manufacturers to visit, incompetent experiments.

For friends who want to know other crusher industry knowledge can also log in to the website.If you are interested in our Fluidized Bed Jet Mill of PTFE DTFE, please feel free to contact us.