Steam Jet Mill for Cotton

In this economic thriving area, many people know that STEAM JET MILL for Cotton, crusher technology is in a leading position in the same industry.

Steam Jet Mill for Cotton provides power by the adiabatic expansion of the compressed air and the compressed gas at the nozzle. The temperature of the system will be reduced. The material is inhaled in the mixing chamber by a negative pressure generated by the high-speed jet of the feed injector. The nozzle is injected into the pulverizing chamber in a certain angle by pulverizing jet in the radius of the pulverization chamber and is distributed over the same level. The jet flow is rotated with the material with a very high speed, and fluid dynamic characteristics are formed on the radius of the pulverization chamber. Material particles collide with huge momentum. Material As the high-speed movement of the airflow, a serious impact, friction and shear, resulting in the wear and wear of the grinding cavity, causing certain pollution to the product. In this apparatus, the treated material is blown at a speed of 20 m / s, and collides with other high speed materials. Due to the high speed flow of the airflow and the high impact strength of the material, the crushing efficiency is very high. At the same time, during the movement of the machine gun, the inner spiral cyclone and outer spiral void. The limit is aggregated to the axis of motion to reduce friction with the tube wall and reduce metal wear to minimize. The air pulverizer has an upward nozzle under the bottom of the pulverized chamber tape, and the material that falls into the pulverized chamber can also be smashed, eliminated by a high-speed air flow entrained by the nozzle in time. The blind zone of the cone under the broken chamber is irregular in the entire simplified body. Scroll, make the ball media and materials have the double effects of collision and grinding, resulting in fine grinding, uniform dispersion.

Steam Jet Mill for Cotton Operation During the operation process, there is an excessive factor in noise:

1 When the crusher is running at high speed, the operation member drives the air to generate \"\"

2 When the device is run, the vibration sound is generated;
3 turntable or hammer and the drug between the drug;
4 The rubbing of the device rotates the friction thereof.
I know why Steam Jet Mill for Cotton has too much noise, we can find a way to solve:
1 Each rotating component adds lubricant, if the bearing and the axis is misalign, then adjust; bearing wear, then Replace the bearing;
2 The heat-generating phenomenon will also generate noise, and can take a reduction in the disintegration of the disintegration of the disintegration;
3 installed the muffler;
4 Such as a damping pad.
If your Steam Jet Mill for Cotton also has similar questions, you can refer to the above situations and programs.

ALPA chemical raw materialsPowder Steam Jet Mill for Cotton Case Sharing:
A mechanical company is a high-tech enterprise engaged in the research and development of solder wire equipment, tin powder equipment, solder paste equipment, pure zinc equipment and other equipment.

With complete, scientific quality management system and powerful R \u0026 D team, and continuously improve product performance.

The company is also a large-scale professional equipment manufacturing enterprise in China.
Case parameters:
Product particle size: remove 20UM with fine powder
hour yield: Sakarlection efficiency 60-90%

Welcome everyone to inquire!