Disc Jet Mill of Pea Starch

DISC JET MILL OF PEA STARCH as a clean, efficient, high-level, high-yield of advanced crusher models in the pulverization of Western medicine raw materials, from a few triggered trace trials Large-scale production of hundreds of tons of production, air flow milling with narrow particle size distribution, average particle size; good powder shape, high product purity; suitable for low melting point, thermal drug; good sealable, low pollution Easy to operate; crushing - mixed - dry online operations have been widely recognized by the company.

The principle of the DISC JET MILL OF PEA STARCH job is to use high-speed airflow to cause the particles of the material itself to collide, and the airflow has the shear effect of the material impact, the impact and shear of materials and other components. The material is caused to become more pulverized and the particle size distribution is narrower. Although in certain areas, DISC JET MILL OF Pea STARCH has an irreplaceable advantage, but it also has a shortcomings that feel a headache, that is, the energy consumption is relatively high. The principle has passed the precipitation of time and multiple applications, which is more mature, and has been widely used in mineral materials, chemical materials, pharmaceuticals and other industries.

Let's take a look at how to extend the use of Disc Jet Mill of Pea STARCH:
1. Strictly follow the operating procedures;
2, easy to damage parts should pay attention to time check, timely replace.
3, the device body has no rotating parts, which is not affected by the lifetime of the bearing. However, due to the difference in powder hardness, the degree of wear is different, especially the wear of the hierarchy knife tip, our company's body part is made of special material, the tip service life is at least more than one year, the knife tip is more than 1 cm or more It will affect the grading accuracy, in order to avoid affecting product quality, it is recommended to contact us to replace the knife pointer;
4. It is recommended to use a long filter device to improve equipment stability, and ensure grading precision.

1, check whether there is oil in the lubrication before booting.
2, clearing the metal, sand, stone and other debris in the material to prevent damage to the machine.
3, the hand must not reach into the feed port, and the cover must not be opened in the operation.
4, the screen aperture should be appropriately selected, and the damage is required.
5. It is strictly forbidden to start the load, the machine is running a minute and then feeds, and the appropriate amount of water is marked.
6, the air is idling in front of 2 minutes to turn off the machine.

A food company is specialized in production and sales of beverage foodsLarge joint venture.
From the development of a single variety to the production of various products, the products produced are all over the country.
The company has PET filling machine from SASIB, Italy, a PET filling machine, a PET filling machine, Italy SIPA, a PET blower, Italy SIPA, PET blower.The annual production capacity reached 300,000 tons.The company has passed ISO9001 quality system certification, and GMP and HACCP specifications are implemented and certified.
Case parameters:
Product particle size: D50: 3-45UM
Hours Yield: 1-5kg