Jet Mill of Fused Silica Powder

Jet Mill of Fused Silica Powder's mainly used pulverization mechanism determines its scope, high finished product and high application, widely used in chemical, minerals, metallurgy, abrasives, ceramics, refractories, pharmaceuticals, pesticides, food, food, Health products, new materials and other industries.

First, the pulverized particle size is small, the distribution is uniform. Since the power distribution on the Jet Mill of Fused Silica Powder material is quite uniform. The ultrafine pulverizer is an apparatus for ultrafine pulverization of dry materials by using air separation, high pressure comminution, shear and other techniques. It consists of a cylindrical crushed chamber, a grinding wheel, a wear rail, a fan, a material collection system, etc. The setting of the grading system not only strictly limits large particles, but also avoids the occurrence of pulverization, thereby obtaining a uniform powder having a uniform particle size distribution. At the same time, the specific surface area of \u200b\u200bfine powder increases, and the amount of adsorption and solubility are also increased accordingly.
Second, reduce pollution, more environmentally friendly: ultrafine pulverization is carried out in a closed system, which avoids the pollution of fine powder to the surrounding environment, and prevents dust pollution products in the air. Therefore, Jet Mill of Fused Silica Powder applies the technology to food and health products, which can effectively control the specific gravity of microorganisms and dust. The ultrafine pulverization speed is high and can be pulverized at low temperatures. Ultra-fine pulverization technology is smashed with ultrasonic air flow, cold grinding and other methods, which are completely different from the conventional pure mechanical pulverization method. After the gas fine particles are broken to the high-speed cyclone separator, the high-speed cyclone separator is broken, and the high-speed cyclone separator enters the coarse-grain separator, and then enters the coarse grain separation zone via the high-speed cyclone separator, and then enters the coarse grain separation area through high speed. Centrifugal separator.
Third, during the grinding process, there will be no local overheating phenomenon, and can even be smash at low temperatures, fast speed, and can be completed instantly.
Therefore, the bioactive ingredients in the powder can be minimized to produce the desired high quality products.


Ultra-fine Jet Mill of Fused Silica Powder Working Principle: Ultrafine Crusher Tested by the feed port spiral feeder, the material is sent to the bulk chamber between the body and the guide circle. Under the shock of the high-speed rotating blade, the material is attached to the body, resulting in impact, shearing, and material and material, the material and the blade, the mutual collision between the ring gear, and alternate. Smash. After the powder, under the tension of the negative pressure airflow, the small powder grains overcome self-weight, the over the guide circle with the gas flow, and enter the grading chamber. The grading impeller consists of blade, and the high-speed rotating blade produces a centrifugal force opposite to the negative pressure, deep into the leaves.The particles in the Dow are simultaneously subject to the center of heart and powder grains and the centrifugal force generated by the impeller. The particles larger than the critical diameter (grading particle size) in powder particles are large, and the pulverization chamber continues to be pulverized, less than critical The diameter particles are discharged through the rigid valve through the drain tube. The higher the rotation speed of the hierarchical impeller, the finer the graded particles, and the rotation of the orthogonal impeller is the determinant of the size of the particle size.

Any machinery device must pay attention to it before use, you must pay attention to the use, operation, so that the damage rate can be minimized, then what should I pay attention to before using Jet Mill of Fused Silica Powder?
1, before use, check if all fasteners are fastened and whether the direction of operation of the spindle is correct, so as not to damage the machine.
2, lubrication should be performed as required to ensure the normal operation of the machine.

4, whether foreign matter or impurities, if it should be disposed in time to avoid damage to the tool.

6, some parts should be checked regularly. If it is damaged, it should be replaced immediately.

AlPa Phosphate Jet Mill of Fused Silica Powder case share: The customer's main business is the production and sales of special powder for rust-proof pigments and diamond tool industries. The raw material production and processing, new products are developed in one, with a production and sales enterprise of phosphate, such as mining, smelting, powder, and new materials.
The customer needs to perform airflow grading to the iron phosphate ultrafine powder, eventually experimenting with our company's grading function to meet the customer needs.
Product particle size: 80kg / h

Welcome everyone browsing Shandong AlPa website, company specializing in the production and development and service of Jet Mill of Fused Silica Powder product technology, high energy Technical experts, professional after-sales service team solved the worries of customers.