Air Classifier Mill for Silicon Carbon Anode

Many friends who want to make industrialized production must be unfamiliar with Air Classifier Mill for Silicon Carbon Anode, Air Classifier Mill for Silicon Carbon Anode has the characteristics of convenient, unclear, crushing product quality, is a very Used comminution machine.

AIR Classifier Mill for Silicon Carbon Anode and cyclone separators, dust collectors and air machines have become a complete crushing system. After filtering the compressed air, the high-speed nozzle is sprayed into the pulverized chamber, and the material is repeated, friction and shear at the intersection of the multi-high pressure airflow. The crushing material moves from the rising airflow to the grading area under the suction of the fan, producing a strong centrifuge generated by a high speed rotation. Under the action of force, the fine particles are separated, and the cyclone and dust collectors are collected by the granular particles, and the coarse particles fall into the pulverized region to continue pulverization.

AIR Classifier Mill for Silicon Carbon Anode Work: By manuality, the material is uniform, feeding the pulverized port, under the action of the fixed knife and rotary knife, and cut into small sections of various straw Then enter the pulverizer, under the strong hit of the hammer placed at high speed, the material is rapidly pulverized, due to the large amount of wind pressure in the centrifugal force and the built-in fan, the pulverized material is filled with the sieved Enter the chamber, sent from the wind pressure transfer pipe to the aggregate room.

If you want to make a big performance during work, maintenance is unable to work, how do you maintain a grading machine?

1. If you clean the classifier, you need to pay attention The motor should not be stained with water, and the shaft is also the same.
2, if you want to change the precision classifier, or if you want to repair, you must be in the case of power failure.
3, usually pay attention to lubrication and maintenance of the bearing of the classifier.
4. If the precision classifier works for 1,500 hours, remember to add lubricant.
AlPA gel method White Carbon Air Classifier Mill for Silicon Carbon Anode Case Sharing: The main products of this customer include beer silica gels, an openings, catalyst carriers, and the like. The company purchased our ALPA AIR Classifier Mill for Silicon Carbon Anode.

Technical parameters:

finished particle size: D50: 12-16UM 10-12UM
Production capacity: 250-450KG


ALPA technology developed crushing equipment has been applied in many actual engineering cases, providing basic information for objective understanding of jet grading technology.