Jet Mill of Pine Wood Pellets

In the classification operation of industrial production at this stage, the use of Jet Mill of Pine Wood Pellets is mainly for the effective smash of solid particles, and it is also a commonly used pulverized equipment in the ultrafine pulverization process. .

JET MILL OF PINE WOOD Pellets form a set of crushing systems. After the compressed air is dried, it is sprayed into the pulverizing chamber by the Lavar nozzle, and the material is repeatedly collided, friction, shear and pulverized, and the crushing material is pulled down with the wind turbulence. Airflow movement to the hierarchical region, under a powerful centrifugal force generated by high speed rotation, so that the crude material is separated, and the fine particles that meet the particle size requirements are collected by the grading wheel into the cyclone and the dust collector, and the crude particles drops to the pulverizer to continue pulverization. . Since Jet Mill of Pine Wood Pellets is simple, it is easy to manufacture, so it is widely used.

Let's talk about how to correctly use Jet Mill of Pine Wood Pellets

1. Prepare before booting the host, attachment machine, pipeline and valve, is it intact No damage, can you work properly.
Second, open

1. Turn on the compressor power supply, the pressure valve and the main valve of the dust collector, then turn on the power switch of the powder machine, and turn on the power.
2. From the zero start grading wheel and gradually adjust to the specified speed.
3. Several turning wind turbines, cyclone separators discharge, dust removal, feed motor power, and then turn on the total power supply of the tube bar, set the inverter frequency, and then begins to break.
4. The particle size of the finished wheel can be adjusted by grading wheel frequencies and charging.
Third, the order of shutdown is: inverter - feeder - Main valve - Compressor - Stepper wheel Motor - Cyclone discharge, dust removal switch - Fan - Total Power - Air Compressor.
4, repair

1. The motor should be lubed regularly, but the grease should not be too large, the bearing temperature is too high.
2. Hierarchical impeller, spiral feeder, crushing nozzle wear should pay attention to check, belt tight and suitable.
3. After a crushing material, after a certain period of time, it is necessary to remove the viscosity of the chalk, so as not to block, thereby affecting the crushing effect.
4. After the filter bag, you should clean or replace it.
V. Note

1. When the discharge device is running, the unloading port cannot be extended to avoid accidents.
2. The rotational speed of the impeller must not exceed the specified requirements, otherwise the temperature is too high, the impeller, and the electric machine are damaged.

3. Regularly check the safety valve to ensure safety.

ALPA Battery Jet Mill of Pine Wood Pellets Case Sharing:
A new energy company is a high-tech enterprise specializing in the development, production and sales of new energy materials. The company is committed to the study of new energy materials.And innovation, the company's products include the special tetracantoxide of lithium battery, magnetic material tetraside and lithium battery positive electrode material manganese acid.
The company has advanced technology and excellent quality, and has established a complete quality management operation system.
Case parameters
Product particle size: D50: 15μm
hour yield: 600kg

ALPA powder is committed to the development, production and sales of ultrafine powder and grading equipment, support according to demandThe model model is complete, the quality is reliable, the efficiency is high, low energy consumption, simple operation, reasonable price, 24 hours can consult!