Steam Jet Mill for PolyLactic ACID

With the continuous development of pulverizer technology, STEAM JET MILL for PolyLactic ACID has gradually penetrated into people's daily lives.

Steam Jet Mill for polylactic ACID is smashing in full-closed state, the fineness of the pulverized particles is better, the granular shape is good, the yield is also large, the pulverization process is no dust production, and the material is purity after crushing, greatly saved. Raw materials. Steam Jet Mill for polylactic ACID can achieve the effect of cell-breaking wall during pulverization, so that the effective component dissolution of the drug material is greatly improved, and the efficacy is also easier to be absorbed by the human body. Experts pointed out that after pulverizing the gas flow crusher, the minimal component can reach the original efficacy. During the pulverization process, it can work according to different medicinal materials and crushedness, generally use a gas flow pulverizer to pulverize the drug. It is possible to save resources between 30% and 70%.

Now let's talk about the troubleshooting of Steam Jet Mill for PolyLactic ACID.

Steam Jet Mill for polylactic ACID Troubleshooting:
1, feed back irrigation: Improper tunnel adjustment, pipeline clogging, screen jamming, dust bag gas permeability or severe wear, hammer surface is serious Waiting, etc. will cause feedback. When this happens, you should find out the cause, then take elimination measures, or remove the valve, replace the powder bag, improve the breathability, or replace the hammer head.
2, bearing overheating: When the bearing lubrication is poor, the damage or the spindle bend, the rotor is severely imbalance, and the belt is too tight and the bearing is overheating. By replacing the lubricant, replace the bearing and spindle, balance the rotor and adjust the belt, the bearing can return to normal state.
3, the strong vibration of the airflow pulverizer: The mounting hammer is wrong. The corresponding weight deviation of the two groups of heavy hammers is too large, the bearing is damaged or the spindle is bent, and the foot is connected to the screw. According to the specific reason, step by step.
4, there is a sound inside the crusher: the part of the crusher is damaged, fall off or hard, such as stone and iron into the machine, that is, the external sound will be generated, and the machine should stop replacing damaged components or remove hard objects.
5, low production efficiency: insufficient electric power power, misconduct, belt slip, severe hammer wear, raw material unevenness or high raw material moisture content is the main reason for the low production efficiency.
We need to regularly check the machines and equipment to ensure proper work, which not only guarantees the safety of people, but also improves equipment efficiency.
ALPA lysis Carbon Black Steam Jet Mill for PolyLactic ACID Case Sharing: The companyIt is a renewable energy application company in Inner Mongolia. When the company recovers the waste tire, it is necessary to use ultrafine pulverized equipment to ultrafine pulverized pulp black.After many incumbent, our ALPA Steam Jet Mill for PolyLactic Acid was selected.
Technical parameters:

finished particle size: D90: 500 目

Production capacity: 2T


The company can provide free experiments and testing, 24-hour consultation services, welcome.