Spiral Jet Mill for Metal Alloy Powder

With the development of society, the application of Spiral Jet Mill for Metal Alloy Powder has become more large.

Spiral Jet Mill for Metal Alloy Powder works mainly after the material is accelerated through the nozzle, and the compressed air enters the flow of the pulverization area, and the material is fluidized, each particle has the same Motion status. In the pulverized region, the accelerated particles collide with each other in each nozzle. The pulverized material is delivered to the grading area through the upper gas stream, and the fine powder of the particle size is selected by the horizontally arranged grading wheel, and the coarse powder that does not reach the granularity requirement, returns to the pulverization region to continue pulverization. Put the qualified fine powder with the airflow into the high-efficiency swirl separator, and purify the dust gas by the dust collector, discharged into the atmosphere, and the entire pulverization process reaches the high requirements of environmental protection.

In the conventional dispersion pulverization process, it is difficult to overcome the phenomenon of heating, viscosity. The machine uses a swirling high-speed rotational movement to produce a strong airflow in the mill. The material enters the crushing room under the negative pressure of the feed port. The vortex vibration generated by the strong gas flow between the blade and the module is generated by impact, shearing and grinding. The heat of the crushing room is taken away by the airflow, and the heat generated during the crushing process does not accumulate. The finished powder from the screen stream, improves the weight of the mill can be adjusted by the screen production efficiency, and the fineness is uniform.

SPIRAL JET MILL for Metal Alloy Powder Motor Maintenance Measures
1, check whether the lubrication of the bearing is good
2, check if all fasteners of the pulverizer are fastened.
3, check whether the transmission belt is installed correctly and the situation is good. If the belt breakage should be replaced in time, when there is oil in the belt or the groove, apply a clean rag to clean.
4. Check if the protective device of the crusher is good. If the protective device is found to be abnormal, it should be excluded in time.
5. Check that there is an absence of material or other debris in the damage chamber. If it is sometimes handled in time.
6, check whether the hydraulic starting machine head or the starting rod is returned, and the gasket is adjusted to be properly and compressed.

ALPA airgel Spiral Jet Mill for Metal Alloy Powder case sharing: This customer is a high-tech enterprise in R \u0026 D, production and sales of nano-energy, fireproof, heat insulating new materials, and its production process The ultrafine pulverizer is needed, and the multi-party examines the last purchase of our AlPa's Spiral Jet Mill for Metal Alloy Powder.
Technical parameters:
finished product particle size: D90: 15-30um

As a 20-year powder engineering equipment manufacturer, Shandong, Shandong, has more than 3,000 customers at home and abroad, has always led the front of the industry, so before consulting, you need to provide the characteristics of the crushing material, enter and exitMaidth parameters, production yield range, purity requirements, specific process requirements (anti-high temperature, explosion-proof, dust pollution, etc.), professional engineers provide appropriate equipment models or system solutions.Welcome to inquire.