Air Classifier Mill for dendrobium

In the classification operation of industrial production at this stage, the use of Air Classifier Mill for dendrobium is mainly targeted by solid particles. It is also a comminuted device that is commonly used in the ultrafine pulverization process of the product.

In terms of airflow milling, it is important to understand its operational rules, which is very important because only familiarize the procedure, can operate correctly.
First, the operation rules of Air Classifier Mill for dendrobium are as follows: Prepare materials before the preparation of the production order is received. Complete the site to clean the grocery. Check whether the transportation pipes and auxiliary equipment, whether the pipelines are blocked, leak or poor sealing, whether the auxiliary equipment is intact, whether it works normally. Whether there is a phenomenon that the material is accumulated in the outer casing and the separator, if the accumulated material is required. Whether the bearing is lubricated, whether it is lubricated in an appropriate place. Check if all pipes, fastening bolts, washers, spindles, and instruments are intact, normal and flexible.
Second, Air Classifier Mill for Dendrobium starts the motor, control the current and time at starting, so that the device can start running. When the equipment is operating normally, the feed speed can be adjusted according to the properties of the material. Uniform continuous feed should not be large or small, thereby affecting the separation effect of the grinding machine, making the machine easily malfunction. During operation, if an abnormality occurs, stop checking immediately before the failure continues.
....................................................................... .. After the machine is idling for 3 minutes, press the stop button to stop the machine. When the machine is completely stopped, open the check door and check the wear of the vessel. Fill in the corresponding production record, update the device status flag, which is convenient for the next use.



The following describes how the AIR Classifier Mill For DendRobium device works:
L The combination is designed as a novel ultrafine powder jet classifier. The grading machine reaches high precision, and can be graded, medium and fine powder three levels of products.

2, the jet classifier does not have any moving parts, and only high pressure air is working medium. Reliability for the classifier host, maintenance and maintenance is convenient. The adjustment of grading granularity is also very convenient, and only the flow meter and several gate valves disposed on the machine can be convenient to adjust the grading particle size.

Today we have learned togetherHow is the Air Classifier Mill for dendrobium for maintenance.
First, the air blower

1. Because the blades in the fan are particularly easy to accumulate, so they must clean the dust in the fan every week.

2, add the bearing box once a month.
3, if there is an abnormality in the fan, it is necessary to stop the ultrafine gas flow classifier for inspection.
Second, the host
1, you should check the graded impeller, spiral feeder, smash nozzle each year, see if there is wear, whether there is a place to replace.
2, running to a certain time, in order not to affect the use of ultrafine gas flow grading machine, some parts must be cleaned.
3, the bearing should make the right amount of lubrication, which will make the temperature abnormally.
Third, the planet waste valve
1, if the ultrafine airflow classifier has an abnormality, it must be downtown immediately.
2, the impeller and the body are cleaned every three months.
3, plus lubricants should also have every three.

ALPA Long Stone Powder AIR Classifier Mill for Dendrobium Case Sharing: The company is a high-tech industry, integrating mineral resources, mining, deep processing in one, main products have six categories: long stone powder, silicon Fine powder, aluminum, kaolin and other products. The product is high, the particle size, reasonable particle size distribution, stable quality, widely used in electrician, electronics, silicone rubber, ceramics, precision casting and other industries. Products are exported to many countries and regions in China. The company needs airflow selection to ultrafine long stone powder.
Finally, our classifier can meet customer needs.
Product Parts: D50: 16.7

Today, the knowledge of Air Classifier Mill for dendrobium, I will introduce you to here. If you want to know more, please continue to pay attention to our website.