Fluidized Bed Jet Mill of Moxidectin

Many friends who want to produce industrialized must be unfamiliar with FLUIDIZED BED JET MILL of Moxidectin. Fluidized Bed Jet Mill of Moxidectin has the characteristics of convenient, fast pulverity, and quality of crushing products. It is very useful. Crush machine.

When the Fluidized Bed Jet Mill of Moxidectin screen material, the screen has good universality under the air pressure of the rotary duct. At the same time, under the gravity of the air blower, the screen collects the qualified material, and automatically discharges the material in the front cavity of the valve body by the unloading valve. The raw material powder driven by the compressed air is continuously supplied to the classifier without the need for rotating components. By accurate control of the airflow into three products: F fine powder, m powder and G coarse powder, and collected in subsequent cyclone dust collectors and dust collectors. The material is driven by the blower of the airflow pulverizer. The lower end of the classifier moves upward moves up to the hierarchical area, the strobe, the strongest centrifugal force generated by the high-speed rotation grading turbine. The fine particles that satisfy the particle size requirements are entered into the cyclone separator or dust collector by the gap of the graded wheel blades. After collecting, some of the thick particles of the fine particles disappear and drops along the cylinder wall to two air ports. The crude particles and fine particles are separated by strong purification of the two winds, and the fine particles rises twice as the grade region, and the crude particles fall to the discharge exit.

The main performance characteristics of the airflow pulverizer: 1, it contains vertical classification equipment, product size D97: 8 150 microns adjustable, granular shape, and narrow particle size distribution. It can be used in series with multi-stage classifiers, or producing multiple granular products at a time. 2, the device is disassembled and cleaned, the inner wall is smooth, no dead angle. The entire system is closed, less dust, low noise, clean and hygiene production process. 3. The control system uses program control and easy to operate.

Fluidized Bed Jet Mill of Moxidectin The reason and solution can be carried out from the following aspects:

1, the hammer installation error in the maintenance assembly. When the hammer is turned off, in order to prevent the weight of the rotor from losing balance, all the hammers in the pulverizer must be turned out together, otherwise it will have a strong vibration in the operation.
2, the difference between the weight of the two sets of hammer exceeds 5 grams. The method of excluding is to adjust the weight of the hammer, so that the difference between the two sets of weight is less than 5 grams.
3, individual hammer card is too tight, there is no open in operation. After the stop, turn the observation with hand and find a way to turn the hammer flexible.
4, other parts of the rotor are unbalanced, and the adjustment balance needs to be carefully checked.
5, the spindle bending deformation. The solution is to school straight or replacement.
6, the bearing gap exceeds damage. Generally use moreThe new bearing can solve the problem.
7. The bottom angle fixing nut is not fixed in a fixed or running.The solution is tightening.

ALPA Soconnes Fluidized Bed Jet Mill of Moxidectin Case Sharing: The company is a professional manufacturer of active biological extracts.Factory, finally purchased our Alpa's Fluidized Bed Jet Mill of Moxidectin.

Technical parameters:
Finished granularity: 100 full pass
Production capacity: 120kg

Today, I will introduce you here, I want to know more information, please continue to pay attention to us.Website.