Steam Jet Mill for Feni

Environmentally friendly STEAM JET MILL for Feni has gradually become the market leading to mechanical equipment, and the modern new mechanical equipment in the mechanical processing and manufacturing industry in the current stage has gradually replaced the traditional rough mechanical processing and production. It has also become a new dominant leading to the realization of technological innovation and upgrading at this stage.

Steam Jet Mill for Feni is affected by many industries, but it also has some shortcomings.

During the purchase period, Steam Jet Mill for Feni is high, energy consumption, and high processing cost; the product particle size is difficult to achieve submicron grade, and the output is greatly reduced during 10 μm or less, and the processing cost is sharp. Increase.

But the application of Steam Jet Mill for Feni is really a wide range of:

1, non-metallic mine

Typical materials are: hard kaolin, talc, graphite , Square alphabet, gypsum, diatom, silica bitcite, heavy crystal stone, osaite, aluminum hydroxide, etc., ultra-fine pulverization, and tamperite and other materials such as nanocalbonate, cerium oxide.
2, thermal materials

Typical materials include lactose, wax, resin, fat, bone powder, plants, etc .;

3, hyperparation processing of Chinese herbal medicine and raw materials [123
Typical materials include pollen, hawthorn, mushrooms, pearl powder, stomach medicine, Nimoda, antibiotics, Ganoderma lucidum, five times, He Shouwu, wearing heart, mint, houttuynia, fern root, puerargen, slate blue root, etc.



Steam Jet Mill for Feni is disposed with a particularly designed high-pressure intake nozzle, which is purified from the nozzle, and forms an ultrasonic air flow through purification and dry compressed air. Materials collide in the center of the high-speed airflow intersection, and it is pulverized in an instant. The pulverized particles rose to the grading chamber, and the qualified particles enter the cyclone separator with the gas, and finally obtain the desired product, the exhaust gas enters the dust collector.

The turbine grading system set in the classification room can obtain a powder of micrometers or even finer. When the pulverized material is pulverized in the pulverized chamber, the same particles at the edge of the turbine will be attached to the two different effort of the centrifuge field (i.e., centrifugal force and airflow resistance generated by turbine). When the particles are large, the centrifugal force is greater than the resistance, and the large particles fly toward the chamber pool wall along the turbine tangential direction, and then returned to the pulverizing chamber to be re-pulverized. When the particles are small, at this time, at this time is less than the resistance, the small particles enter the interior of the turbine with the rising airflow, and collectively collected by the cyclone to qualified products.



Steam Jet Mill for Feni Installation Precautions

1. Preliminary checking of host devices such as classifiers, wind turbines, and have ergonical damage during transportation or long-term storage, view There is no abnormalities in the equipment and the fan airway, rotating the grading impeller and the wind turbine spindle, and observes whether it is flexible.

2. Check the degree of fastening of the equipment pre-installed components, and must be added to the lubricating oil to be lubricated.
3, the mounting grading wheel should strictly prevent collision, classify the host, and the fan should be tested, and the level is specified by the gasket, and there is a basic requirements and the foundation fixation.
4, require the sealing pipe interface to configure the sealing gasket.
5, after the layout machine is installed, first observe the direction of grading motor.
6. When the control cabinet is installed, the corresponding relationship between the terminal sequence number and the equipment is carefully verified.
7. After the installation is completed, the first empty car is running 1-2 hours, and it is easy to securely check the accuracy and coordination of the equipment action at any time.

ALPA Ceramic Powder Steam Jet Mill for Feni Case Sharing: This customer is a mechanical equipment company, mainly engaged in drying, granulation, mixing equipment production and sales, company technical strength, is the interaction technology High-tech enterprises integrated integrated, knowledge intensive.

The customer lacks experience in powder grading, but many ultrafine powder is currently required to select ultrafine powder for ultrafine powder. The customer has chosen our ALPA as a partner after investigation. Provide a grading machine device for its customers' ceramic powder production lines.
As a crusher manufacturing large enterprise, Shandong ALPA has been working to provide customers with greater value, the fineness, production capacity and installation site of each project is important information for custom selection, pre-sales service session.
AlPa There are 24-hour online customer service to answer questions, provide an ideal grading machine production line solution, and provide the factory quotation to increase escort for ceramic powder grading projects. Welcome major ceramic powder manufacturers to inquire.
The company has consistently follows the management of standards, puts the quality in front of the production and service policy, and provides products and services to our customers with confidence and weighing airflow mills.