Spiral Jet Mill for Potassium Carbonate

As is well known, Spiral Jet Mill for Potassium Carbonate This product technology has been widely valued by the industry.

The overall development trend of China's material ultrafine crushing technology is to make a more ultra-fine pulverized equipment to various types of ultra-fine pulverization equipment towards low-cost, high efficiency, strong dispersibility, good dispersibility and stable quality. High technical requirements.
Spiral Jet Mill for Potassium Carbonate Engineering Technology will need more and more high-purity ultrafine powder, and ultrafine powder will play an increasingly important role in high-tech research and development. Although high-purity ultrafine powder is prepared by chemical synthesis, it is too high, which is extremely difficult for industrial production. The main means of obtaining the ultrafine powder is still mechanical and pulverized, and ultra-fine pulverization technology is a combination of many technologies. Its development also depends on the progress of the relevant technology. Therefore, the main development trend of ultrafine pulverization equipment has been developed with fine classified equipment with ultrafine pulverized equipment. Ultrafine pulverized equipment with low energy consumption, small land, and has high handling capacity. Integrated development of equipment and process research. Ultrafine pulverization and supporting equipment must adapt to specific bored features and product indicators, and the scale model must be more adapted.

Spiral Jet Mill for Potassium Carbonate Working: Airflow Crusher and Cyclone Separator Distonege Conforms a complete pulverized system, compressed air is filtered and dry, then pass the Raval nozzle in multiple high pressure air The intersection enters the crushing room at high speed. The material is repeated collision, friction and shear, and the crushing material is pulverized in the fan torch. Under the action of the high-speed rotary classification machine, the fine particles that satisfy the particle size required by the grading wheel with thickness, fine product to collect the fine particles and dust collectors by the grading wheel with the thickness, fine particles of the particle size and the dust collector and dust collectors. And continue to break in the broken area.

High-pressure gas (compressed air, superheated steam or other gas) injected from the pulverization chamber and the high-speed air flow consisting of solid particles injected into the crushing chamber were subjected to tangential shock of the air flow injected from different angles. The solid particles collide with each other and friction in the mixed airflow. Since the temperature generated during the pulverization is small, it is conducive to the low melting point crushing material. When toxic, flammable or radioactive substances are crushed, superheated steam is usually used to prevent outwardly spread.
This is because all materials can be precipitated when steam is condensed. The gas flow pulverizer utilizes the material to achieve huge kinetic energy under the action of the high-speed airflow, causing the high-speed collision and the severe friction between the particles, while the high-speed airflow generates shear effects, thereby achieving the purpose of pulverization.


Let's know how to use Spiral Jet Mill for correctlyPotassium carbonate? I hope the content below can help you.
1. Preparation before the pulverizer is started to check whether the host, joint, pipeline, and the valve are normal and working properly.

2, open the pulverizer

(1) Open the compressor power supply, dustpress pressure valve and the main air valve, open the power switch of the pulverizer, turn on the power switch.

(2) From zero, gradually adjust to the specified speed.

(3) Open the fan, cyclone separator, dust removal and charger power, open the total power box, set the frequency of the inverter, and then start charging.
(4) The particle size of the finished product can be adjusted according to the frequency and bearing capacity of the grading wheel.
3, pulverizer shutdown sequence is: inverter - feeder - main valve compressor - Compressive plane impeller motor - cyclone material, dust removal switch - fan - General power supply air compressor.
4, eddy current pulverizer maintenance and maintenance

(1) Periodically lubricate the eddy current pulverizer, but the lubricating oil should not be too large to prevent too high of the bearing temperature.
(2) Check the wear of impeller, helical conveyors, and crushing nozzles.
(3) After pulverizing the material, the rubber powder should be removed to avoid clogging, thereby affecting the crushing effect.
(4) After the filter bag is filtered, it should be cleaned or replaced.
5, eddy current pulverizer precautions

(1) When the device is running, the unloading port cannot be reached, and the accident occurs.
(2) The rotational speed of the impeller should not exceed the specified requirements, otherwise the temperature is too high, the impeller and the electric chance are damaged.
(3) Regularly check the safety valve to ensure safety.

ALPA desulfurizer Spiral Jet Mill for Potassium Carbonate case share: The company is a high-tech company that requires a desulfurizer crushing machine, investigating a number of powder equipment manufacturers at home and abroad, and finally chose our alpa Spiral Jet Mill for Potassium Carbonate.
Technical parameters:
finished particle size: 200 mesh 90% passed
Production capacity: 4-5T


Shan dong alpa specializes in Spiral Jet Mill for Potassium Carbonate product production Welcome to consult with development and service. With a perfect quality, excellent service, the most affordable price, the customer's first attitude provides the best eddy current crusher products and services.