Fluidized Bed Jet Mill of Soda ASH

FLUIDIZED BED JET MILL OF SODA ASH is good, only need to be produced in a smooth floor, and low noise, which can avoid dust leakage during the pulverization process, which is favored by the powder industry.

Fluidized Bed Jet Mill of Soda ASH is simple and powerful, and Fluidized Bed Jet Mill of Soda ASH usually gets a very good effect. Its design is simple, easy to operate, easy to clean.

Let's take a look at the feature of the Fluidized Bed Jet Mill of Soda ASH.
1, can effectively reduce cost, reduce cost, suitable for low value of coarse powder.
2, simple structure, convenient maintenance, less easy to lose weight, low operating noise, low energy consumption.
3, the classification machine uses large diameter single-stage classification wheels to improve production capacity.
4, the inner wall smooth and wear, more conducive to the classification of materials.
5, use a negative pressure operation, so that it does not leak, to achieve environmental requirements.
6, running stable and reliable, its product can be uniform.

Let's talk about how to correctly use the method of Fluidized Bed Jet Mill of Soda ASH

1. Prepare before booting the host, attachment machine, pipeline, and valve, whether it is intact, whether it can be normal Work.
Second, open

1. Turn on the compressor power supply, the pressure valve and the main valve of the dust collector, then turn on the power switch of the powder machine, and turn on the power.
2. From the zero start grading wheel and gradually adjust to the specified speed.
3. Several turning wind turbines, cyclone separators discharge, dust removal, feed motor power, and then turn on the total power supply of the tube bar, set the inverter frequency, and then begins to break.
4. The particle size of the finished wheel can be adjusted by grading wheel frequencies and charging.
Third, the order of shutdown is: inverter - feeder - Main valve - Compressor - Stepper wheel Motor - Cyclone discharge, dust removal switch - Fan - Total Power - Air Compressor.
4, repair

1. The motor should be lubed regularly, but the grease should not be too large, the bearing temperature is too high.
2. Hierarchical impeller, spiral feeder, crushing nozzle wear should pay attention to check, belt tight and suitable.
3. After a crushing material, after a certain period of time, it is necessary to remove the viscosity of the chalk, so as not to block, thereby affecting the crushing effect.
4. After the filter bag, you should clean or replace it.

V.Precautions

1. When the discharge device is running, the unloading port cannot be extended to avoid accidents.
2. The rotational speed of the impeller must not exceed the specified requirements, otherwise the temperature is too high, the impeller, and the electric machine are damaged.
3. Regularly check the safety valve to ensure safety.

ALPA Carbonate Fluidized Bed Jet Mill of Soda ASH Case Sharing: This customer is a company that is produced, selling lithium carbonate, lithium hydroxide, potassium sulfate, and salt, etc., in the process of selling carbonateIt is found that the current customer needs is ultrafine powder of lithium carbonate, so it has upgraded the production line of lithium carbonate, purchased many of our Alpa's multiple Fluidized Bed Jet Mill of Soda ASH.
Technical parameters:
Finished granularity: D50: 5-8μm
Production capacity: 450kg

AlPa also believes that future airflow crushing technologies will become better and better.Users who need to purchase such products can contact us.