Spiral Jet Mill for Seaweed

Environmentally friendly Spiral Jet Mill for Seaweed has gradually become the market leading to mechanical equipment, and the modern new mechanical equipment in the machinery processing and manufacturing industry in the stage has gradually replaced the traditional rough mechanical processing and production. It has also become a new dominant leading to the realization of technological innovation and upgrading at this stage.

Generally, the high-speed airflow accelerated pulverized solid particles have the following three ways:

(1) Airflow particles accelerate nozzle: After the airflow and the particles are mixed, the particles can be obtained. Very high speed (almost the same speed of airflow speed), but the material wears in the nozzle in the nozzle, rarely used in practical applications.
(2) Syringe Acceleration Particles: High Speed \u200b\u200b(Ultrasonic Speed) airflow and particles mix accelerate in the mixing tube, the particles obtain a higher speed, but the material is severe to the mixing tube.
(3) Free airflow acceleration particles: particles enter the high-speed airflow in the form of freely drop, only the high-speed air flow is passed through the nozzle and the wear is small.


Working principle: Transform compressed air or superheated vapor through the nozzle to a high-speed airflow, when the material is sent to the puller chamber by the feeder, a strong impact and a strong impact and Dramatic friction makes the material into a super fine product.

There are some industries like our food or chemicals, pharmaceutical industries, etc. It is made of material comminution. The coarse crusher is mainly used in the various industries to preprocessing, the main role is also a relatively large number of materials or relatively small particulate materials.

How should spiral Jet Mill for SeaWeed start
Before starting, first scroll the rotor first, see the jaw, hammer and rotor operation, is not flexible There is no bump image in the shell. Is the direction of rotation of the rotor to be consistent with the direction of the machine arrow, the power machine and the pulverizing machine are not outstanding. Do not replace the leather wheel at will, to prevent the transition chamber produce burst of pulverization, or the speed is too low
affect the work efficiency of the pulverizer. After the airflow pulverizer starts, it should be idled for 2-3 minutes, no abnormal appearance, then press the job. At any time, you should pay attention to the job status of the crusher, and the feeding should be uniform to prevent jams, do not have long-term overload operations. If there is found that vibration, noise, the bearing and the body temperature is too high, the external spray, etc., should be immediately stopped, exclude the failure of the sustainable job.

Alpa Organic Pigments Spiral Jet Mill for Seaweed Case Sharing: The company is a Taiwan chemical raw material enterprise. In 19 years, the company purchased a mechanical grinder for pulverizing organic pigments from our AlPa.
Technical parameters:
Finished granularity: D50 less than 325 mesh
Production capacity: 300kg

Spiral Jet Mill for Seaweed's usage specification has a lot, I want to learn more about ultrafineFriends of the airflow classifier welcome to consult with us!