Jet Mill of EPOXY RESIN MIXTURE

Jet Mill of EPOXY RESIN MIXTURE is a very convenient device that can be used to crush all kinds of products, especially some fine particle products need to be used.

With the continuous social demand Increase, Jet Mill of EPOXY RESIN MIXTURE is facing huge challenges. Therefore, ALPA Technology Co., Ltd. persisted unremitting, continuously improved the superfine grade strength, particle size distribution, particle crystal form, etc. to achieve more production.
ALPA, strive to achieve low energy consumption, high yield, non-pollution in ultra-fine classifier, achieve good granularity, dispersion, unique and potential performance of the product, improve the competitiveness of powder classifier, environmental protection and low Power performance.

JET MILL OF EPOXY RESIN MIXTURE is disposed with a particularly designed high-pressure intake nozzle, which is squeezed from the nozzle, forming an ultrasonic air flow through purification and dry compressed air. Materials collide in the center of the high-speed airflow intersection, and it is pulverized in an instant. The pulverized particles rose to the grading chamber, and the qualified particles enter the cyclone separator with the gas, and finally obtain the desired product, the exhaust gas enters the dust collector.

The turbine grading system set in the classification room can obtain a powder of micrometers or even finer. When the pulverized material is pulverized in the pulverized chamber, the same particles at the edge of the turbine will be attached to the two different effort of the centrifuge field (i.e., centrifugal force and airflow resistance generated by turbine). When the particles are large, the centrifugal force is greater than the resistance, and the large particles fly toward the chamber pool wall along the turbine tangential direction, and then returned to the pulverizing chamber to be re-pulverized. When the particles are small, at this time, at this time is less than the resistance, the small particles enter the interior of the turbine with the rising airflow, and collectively collected by the cyclone to qualified products.


Any mechanical equipment that has certain precautions before use, and must check the precautions to minimize the damage rate, so Jet Mill of EPOXY. What preventive measures take before use?

1. Check whether the firmware is tight before use, whether the spindle direction is correct, so as not to damage the machine.

2, lubrication should be carried out in accordance with the requirements to make the machine operating properly.
3, the material cannot be mixed before the grinding machine is added to avoid damaging the pulverizer.
4, foreign matter should not be treated in time to avoid damage to the tool.
5. When using the crusher, if there is abnormality, it should be handled immediately to avoid a large loss. 6. If damage should be replaced immediately, certain components should be checked.
ALPA Trimage Jet Mill OF EPOXY RESIN MIXTURE Case Sharing:
A lithium electrode material company main product is \"lithium electrode material\", the most important component of the lithium ion battery includes an electrolyte, isolation material, a positive material, an anode material, a housing, or the like, a lithium electrode materialIncluding lithium cobalt organte, lithium iron phosphate, three-dimensional materials, etc.

Case parameters:

Product particle size: D50: 9.1μm
Hour Yield: 300kg

If you have something about other crushers, you want to know, welcome to consult!