Spiral Jet Crusher of AcyClovir

Spiral Jet Crusher's balance performance is good, only need to be produced in a smooth ground placement, and low noise, which can avoid dust leakage during the pulverization process, favored by the powder industry.

Spiral Jet Crusher Of AcyClovir is suitable for combating machinery of materials such as synthetic resins, food, chemicals. The apparatus is different from the ordinary inner grinding machine, not only simply crushed, such as impact force and cutting force, but also by many generated ultrasonic eddy currents and vibration thus generated high-frequency pressure vibration to crush the material. Under certain conditions, the viscous material and the elastic material can also be pulverized. The pulverizer is almost no increase in the cyclic temperature during the pulverization process, so the thermal material can also be pulverized. The pulverizer has a reasonable structure, stable operation, low energy consumption, large crushing capacity, small size, no fault, easy to clean and maintenance. General shells use water cooling and their own air volume, conveying crushing materials, improves temperature, and reduces thermal materials. The wear of the blade is caused by a large amount of ultrasonic vortex generated by the back of the blade and the vibration of the high frequency pressure. Compact, no dust, no dust.

SPIRAL JET CRUSHER OF ACYCLOVir's pulverization chamber is arranged with a particularly designed high-pressure intake nozzle, which is purified and dried, and is admitted from nozzle to form an ultrasonic air flow. Materials collide in the center of the high-speed airflow intersection, and it is pulverized in an instant. The pulverized particles rose to the grading chamber, and the qualified particles enter the cyclone separator with the gas, and finally obtain the desired product, the exhaust gas enters the dust collector.

The turbine grading system set in the classification room can obtain a powder of micrometers or even finer. When the pulverized material is pulverized in the pulverized chamber, the same particles at the edge of the turbine will be attached to the two different effort of the centrifuge field (i.e., centrifugal force and airflow resistance generated by turbine). When the particles are large, the centrifugal force is greater than the resistance, and the large particles fly toward the chamber pool wall along the turbine tangential direction, and then returned to the pulverizing chamber to be re-pulverized. When the particles are small, at this time, at this time is less than the resistance, the small particles enter the interior of the turbine with the rising airflow, and collectively collected by the cyclone to qualified products.


In the production process, the temperature rise of the bearing must be checked frequently. When the temperature rise exceeds 50 ° C, it should be downtown, and the reason is to identify and troubleshoot. When the new machine is running, the drive belt is easy to elongate, pay attention to adjust the proper looseness of the belt to ensure the work life of the belt. If the lifting piece should be checked frequently, replace the production quality and production in time. The blade, the bushing should often check the wear situation. If the wear is worn, the productivity decreases, and the particle size is roughly discovered to be replaced. The host and the grading flow bearing are lipids, and the 2nd special lipid is used, the replacement period of the bearing is around three months, greaseThe filling amount is 1/2 of the interior space in the bearing cavity, and it is not too much to fill the grease. Otherwise, the bearing temperature is too high. The spiral feeder has changed the lipid period of half a year, and Cape Calcium-based grease. In the output shaft E, ie the pulley E, avoiding the weight of the weight, damage the part. It is strictly forbidden to turn the handle on the stop. The lubricating oil used in this regulator is used with N32 alkaline high-zinc high-grade anti-motor oil pressure oil, and the deceleration machine is 401 generally lubricating oil, and it is not necessary to use other machines. After four or five months, new oil should be replaced.

ALPA Quartz Powder Spiral Jet Crusher Of Acyclovir Case Sharing:

The main products of a silicon micron powder include molten stone sand, molten silicon fine powder, soft composite silicon fine powder, high purity ultrafine silicon powder, active silicon powder, Crystalline silicon fine powder, spherical silicon fine powder and other specifications are complete.

Main uses: Photovoltaic solar industry and electronic package materials, high temperature refractory materials, aerospace materials, quartz glass tubes, quartz ceramic rolls, and coated copper industries.
Case parameters:
Product particle size: Remove 20UM with fine powder
hour production: sorting efficiency 60-90%

Users who need to purchase SPIRAL JET CRUSHER OF ACYCLOVIR products can choose Shan Dong Alpa, this is a manufacturer specializing in the production and sales of various eddy current crushers, affordable, after-sales service.