Steam Jet Mill for Cassia

STEAM JET MILL for Cassia has good balanced performance, only need to be produced in a smooth ground, low noise, and avoid dust leakage in the pulverization process, which is favored by the powder industry.

The airflow classification is based on centrifugal force, gravity, inertial force, etc., produces different motion trajectories depending on the gas (usually air), gravity, and inertial force to achieve different particle sizes. Classification. Steam Jet Mill for Cassia can be divided into static classifiers and dynamic classifiers based on whether there is moving parts. Steam Jet Mill for Cassia has become better and better. Many industries need to control the particle size of fine powder.

Next, we understand the working principle of the ultrafine pulverizer.
When working, the material to be pulverized from the feed hood on the side of the hood shell, relying on the grinding roller device suspended on the main plum flower frame, rotating around the vertical axis, and itself is rotated, due to rotation The role of the grinding roller is swing outward, pressing the mill, so that the shovel shovel is sent between the mill and the abrasive ring, and the purpose of the pulverized material is achieved due to rolling rolling of the grinding roller. Warlective process: After the material is ground, the fan blows the wind into the main casing, blows the powder, and is selected from the analyzer above the grinding chamber, and the fine material is refined into the grinding chamber. The style of constructing the wind flow into the cyclone collector, and after collecting the powder, it is the finished product.
The wind flow is reflected in the wind turbine in the upper end of the large cyclone collector, and the wind path is cycle, and in the negative pressure state, the air of the circulating wind turbine increases the exhaust gas pipeline between the flowers and the middle of the main unit. Small cyclone collector for purification treatment.

Ultraflight Steam Jet Mill for Cassia Operation:
1, check whether the lubrication is oil before power-on.
2, clearing the metal, sand, stone and other debris in the material to prevent damage to the machine.
3, the hand must not reach into the feed port, and the cover must not be opened in the operation.
4, the screen aperture should be appropriately selected, and the damage is required.
5. It is strictly forbidden to start the load, the machine is running a minute and then feeds, and the appropriate amount of water is marked.
6, the air is idling in front of 2 minutes to turn off the machine.

ALPA Cobalt Solitrate STEAM JET MILL for Cassia Case Sharing:
A energy company is a professional lithium-ion powertrain for new energy vehicles, and the R \u0026 D of lithium-ion batteries in the energy storage. Industrialization high-tech enterprises, the company actively responded to national policy calls, in order to promote new energy vehicles, the new energy car is rapid, sustainable, and insist on walking independent research and development roads, and has finishedThe core technical system of full independent intellectual property has successfully developed a number of series of lithium-ion power battery batteries, which have been widely used in China's electric new energy vehicles, and market distribution has spread all over the country.
Case parameters:
Product particle size: D50: 15μm
hour yield: 600kg

As a 20-year powder engineering equipment manufacturer, Shandong Alpa, has more than 3,000 customers at home and abroad,Rich research and development experience has always led the front end of the industry, so before consulting, you need to provide the characteristics of the crushing material, the granular parameters, production production range, purity requirements, specific process requirements (anti-high temperature, explosion-proof, dust pollution, etc.), Professional engineers provide appropriate equipment models or system solutions according to this information.Welcome to inquire.