Jet Mill of Dry TEA

With the development of society, the application of Jet Mill of Dry TEA has become more large.

Jet Mill of Dry TEA is a classified device that is relatively wide range of applications at this stage, which has a very good fineness in production, which can be finely pulverized silicon carbide, metal , Ore and other substances, and can also perform the production of ceramics, medicine, and biochemical products with high purity requirements.

JET MILL OF DRY TEA utilizes the material to achieve huge kinetic energy under the action of high-speed airflow, causing severe friction between high speed collisions and particle, while high-speed airflow generates shear effects, thereby achieving The purpose of pulverization.

JET MILL OF DRY TEA Job Safety Application Basic Requirements

1 It is not allowed to use iron and sticks instead of hand feed.

2, pulverizer and power unit should be installed firmly. If the equipment is fixed for a long time, it should be fixed on the cement; if the device is a mobile operation, the unit should be installed on the base made of angle iron, and ensure that the belt wheel groove of the power machine (diesel or electric motor) and the equipment is in the same Rotary plane.

At the same time, check if the leather belt looseness is appropriate.
4 Whether the power machine and the pulverizing machine are lubricated.
5, don't just replace the pulley, prevent the transition chamber to produce explosion, or the speed of the pulverizer is too low.
6. After the pulverizer starts, it should be idled by 2 to 3 minutes, no abnormal phenomenon, then press the work.
7. At any time, pay attention to the operation of the equipment, the feeding should be uniform, to prevent blocking bullies, do not have a long time overload. If there is found that vibration, noise, the bearing and the body temperature is too high, the outer spray, etc., should be closed immediately, and the fault can be eliminated.
8. When blocking occurs, it should be stopped immediately. It is strictly forbidden to use a wooden stick or hand to feed or pull out the feed to avoid the pulverizer to wound the arm or damage the machine.
9. If you crush a hard raw material, the operator must wear glasses.
10, the workplace should have a ventilator and strictly prohibit fireworks to prevent dust explosion from fire.


ALPA Soda Jet Mill of Dry TEA Case Sharing: The company is a chemical enterprise, it is necessary to make ultra-smash of small soda, too much investigationHome powder equipment, finally chose our AlPa Jet Mill of Dry TEA.
Technical parameters:

Finished granularity: D97: 20UM

Production capacity: 10-220kg

The above is Jet Mill of Dry TEA introduced to you, you can make it simple.For more information, please contact us if you need to purchase eddy current pulverizer, disc air pulverizer, ultrafine crusher products please contact us